What to do if my Beko WTL74051W Washer does not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter might be clogged, so you should clean the pump filter.
What to do if my Beko Washer doesn't start after closing the door?
If your Beko Washer programme doesn't start after closing the door, it might be because the Start / Pause / Cancel button was not pressed. Press the Start / Pause / Cancel button. Also, make sure that you have not excessively loaded the machine and that the loading door is closed properly; reduce the amount of laundry if needed.
Why does water leak from the bottom of my Beko Washing machine?
If you notice water leaking from the bottom of your Beko washing machine, it could be due to a clogged or twisted water drain hose. Clean or flatten the hose to resolve this. Another possible cause is a clogged pump filter, which should also be cleaned.
Why doesn't my laundry smell like softener after washing in my Beko WTL74051W Washer?
If your laundry doesn't smell like softener after washing in your Beko Washer, it might be because the detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water and put the detergent in the correct compartment. Another reason could be that the detergent might be mixed with the softener, so do not mix the softener with detergent, and wash and clean the dispenser with hot water.
What to do if my Beko WTL74051W Washer stopped shortly after the programme started?
If your Beko Washer stopped shortly after the programme started, it might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
Why does my Beko WTL74051W Washer vibrate and make noise?
Your Beko Washer may vibrate or make noise due to several reasons: * The machine might be unbalanced; adjust the feet to level it. * A hard substance might be in the pump filter; clean the pump filter. * Transportation safety bolts might not be removed; remove them. * The laundry quantity might be too little; add more laundry. * The machine might be overloaded; take some laundry out or distribute the load evenly. * The machine might be leaning on something; ensure it's not.
Why does my Beko WTL74051W directly discharge the water it takes in?
If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
General| Drum type | - |
|---|---|
| Door hinge | Left |
| Motor type | Brushless |
| Water fill | Cold |
| Control type | Rotary |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | No |
| Door opening angle | 170 ° |
| Outlet hose length | 1.3 m |
| Appliance placement | Freestanding |
| Feet adjustment | 15 mm |
| Drum capacity | 7 kg |
| Cycle time (max) | 207 min |
| Delay start (max) | 9 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 15 |
| Maximum washing temperature | 90 °C |
| Maximum water flow pressure | 1000 kPa |
| Minimum water flow pressure | 100 kPa |
| Cycle time (quick washing program) | 28 min |
| Current | 10 A |
| Connected load | 2200 W |
| Power plug type | Type G |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Water consumption per cycle | 45 L |
| Energy consumption washing per cycle | 0.685 kWh |
| Energy efficiency index (EU 2017/1369) | 1.04 |
| Package depth | 560 mm |
| Package width | 650 mm |
| Package height | 880 mm |
| Package weight | 68000 g |
| Hose diameter | 20 mm |
| Required tools | Standard tool box |
| Paper packaging weight | 10 g |
| Plastic packaging weight | 178 g |
| Harmonized System (HS) code | 84501190 |
| Expanded Polystyrene (EPS) packaging weight | 758 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 67000 g |
| Door opening diameter | 340 mm |
Guidelines to prevent injuries and material damage risks.
Rules for safe use by children and supervision requirements.
Precautions for safe electrical connection and operation, avoiding shock.
Guidance on selecting a suitable and safe location for the appliance.
Instructions for safely removing packaging safety bolts and reinforcement.
Step-by-step guide to remove transportation safety bolts.
Procedure for connecting the appliance to the water supply.
Instructions for properly connecting the drain hose to the waste water outlet.
How to level and balance the machine using its adjustable feet.
Details on safely connecting the appliance to the electrical power supply.
Steps to take before the first use, including drum cleaning.
Guidance on selecting and adding detergents, softeners, and other agents.
How to select programmes and tips for efficient washing.
Details on wash programmes, their duration, and consumption.
Steps to drain residual water and clean the pump filter.
To Next Page
