Why is the washing performance poor and stains persist on my Beko Washer?
If the washing performance of your Beko Washer is poor and stains persist, ensure you are using the recommended amount of detergent. Avoid overloading the machine. Select the proper programme and temperature for the laundry. Use original detergent appropriate for the machine and put the detergent in the correct compartment. Also, avoid using too much detergent.
Why does my Beko WTV6711BC1 Washer not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter could be clogged, so clean the pump filter.
What to do if my Beko Washer programme does not start?
If your Beko Washer programme doesn't start after closing the door, ensure you've pressed the Start / Pause / Cancel button. Also, if you have excessively loaded the machine, reduce the amount of laundry and make sure that the loading door is closed properly.
Why is my Beko Washer not rinsing well?
If your Beko Washer isn't rinsing well, the amount, brand, or storage conditions of the detergent might be inappropriate, so use a detergent suitable for washing machines and your laundry. Ensure the detergent is placed in the correct compartment. Also, check the filter and the drain hose for any clogs or folds.
Why does my Beko WTV6711BC1 enter standby mode or not take in water?
If your Beko Washer enters standby mode or doesn't take in water, ensure the tap is turned on and the water inlet hose isn't bent; flatten the hose if it is. Also, check if the water inlet filter is clogged and clean it if necessary. Make sure the loading door is closed properly. If the water connection is wrong or water is cut off, check the water connection and press the Start/Pause key after the water has been supplied again to resume operation.
Why is foam overflowing from the detergent drawer of my Beko Washer?
If foam is overflowing from the detergent drawer of your Beko Washer, it may be because too much detergent is used. Mix 1 tablespoonful of softener with ½ l of water and pour into the main wash compartment of the detergent drawer. Also, ensure you are putting detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
Why does my laundry not smell like the softener after using my Beko WTV6711BC1?
If your laundry does not smell like the softener after using your Beko Washer, make sure you put the detergent in the correct compartment and do not mix the softener with detergent.
Why is there too much foam forming in my Beko WTV6711BC1 Washer?
If too much foam forms in your Beko Washer, ensure you are using detergents appropriate for washing machines and only use a sufficient amount. Store detergent in a closed and dry location. If washing meshed laundry, use smaller amounts of detergent. Put the detergent in the correct compartment.
Why is the washing performance poor and laundry turns gray in my Beko WTV6711BC1 Washer?
If your Beko Washer's washing performance is poor and laundry turns gray, you may not be using enough detergent over a long period. Use the recommended amount of detergent appropriate for water hardness and the laundry. Also, ensure you're selecting the proper temperature for the laundry. If you are using hard water, you may need to increase the amount of detergent. Avoid using too much detergent as well.
Why does my Beko WTV6711BC1 Washer directly discharge the water it takes in?
If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
General| Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Number of Programs | 15 |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page
