Why is my laundry still wet at the end of the programme in my Beko WTV6711BC1 Washer?
If your laundry remains wet at the end of the programme in your Beko Washer, excessive foam might have occurred and the automatic foam absorption system might have been activated due to too much detergent usage. Use the recommended amount of detergent.
Why does my Beko WTV6711BC1 Washer not switch to the spinning step?
If your Beko Washer doesn't switch to the spinning step, there might be an unbalanced load in the machine. Also, the machine will not spin if water is not drained completely, so check the filter and the draining hose. Excessive foam might have occurred, so use the recommended amount of detergent.
Why is there water leaking from the bottom of my Beko washing machine?
If there's water leaking from the bottom of your Beko washing machine, the water drain hose might be clogged or twisted, so clean or flatten the hose. Additionally, the pump filter could be clogged, so clean the pump filter.
Why does my Beko WTV6711BC1 enter standby mode or not take in water?
If your Beko Washer enters standby mode or doesn't take in water, ensure the tap is turned on and the water inlet hose isn't bent; flatten the hose if it is. Also, check if the water inlet filter is clogged and clean it if necessary. Make sure the loading door is closed properly. If the water connection is wrong or water is cut off, check the water connection and press the Start/Pause key after the water has been supplied again to resume operation.
Why is my Beko Washer not rinsing well?
If your Beko Washer isn't rinsing well, the amount, brand, or storage conditions of the detergent might be inappropriate, so use a detergent suitable for washing machines and your laundry. Ensure the detergent is placed in the correct compartment. Also, check the filter and the drain hose for any clogs or folds.
What to do if my Beko Washer programme does not start?
If your Beko Washer programme doesn't start after closing the door, ensure you've pressed the Start / Pause / Cancel button. Also, if you have excessively loaded the machine, reduce the amount of laundry and make sure that the loading door is closed properly.
Why does my Beko WTV6711BC1 Washer not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter could be clogged, so clean the pump filter.
General| Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Number of Programs | 15 |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page
