What to do if Beko Washer does not drain water?
If your Beko Washer doesn't drain water, the water drain hose might be clogged or twisted, so clean or flatten it. Alternatively, the pump filter could be clogged, so clean the pump filter.
What to do if my Beko Washer enters standby mode or does not take in water?
If your Beko Washer enters standby mode or doesn't take in water, first, make sure the tap is turned on. Check if the water inlet hose is bent and flatten it if so. Also, the water inlet filter might be clogged, so clean it. Ensure the loading door is closed properly. If the water connection is wrong or water is cut off, check the connection and press the Start/Pause key after the water is supplied to resume operation.
Why is there detergent residue in the detergent drawer of my Beko WTV77122BW1?
If you find detergent residue in the detergent drawer of your Beko Washer, ensure the drawer is dry before adding detergent. The detergent may have gotten damp, so keep detergents closed in a humidity-free environment and avoid excessive temperatures. Check the water pressure. If the holes of the detergent compartment are blocked, clean them. Avoid mixing softener with detergent, and wash the dispenser with hot water. For issues with the detergent drawer valves, call the Authorised Service Agent.
Why is my Beko WTV77122BW1 Washer vibrating or making noise?
If your Beko Washer vibrates or makes noise, several factors could be the cause. First, ensure the machine is standing balanced by adjusting the feet. A hard substance might be in the pump filter, so clean it. Also, remove the transportation safety bolts. The laundry quantity could be too little, so add more, or the machine might be overloaded, so take some laundry out or distribute it evenly. Finally, ensure the machine isn't leaning on anything.
Why is the washing performance poor and laundry turns gray with my Beko WTV77122BW1?
If your Beko Washer's washing performance is poor and the laundry turns gray, it could be due to several reasons. You might have used an insufficient amount of detergent over a long period, so use the recommended amount of detergent appropriate for water hardness and the laundry. Washing at low temperatures for a long time can also cause this, so select the proper temperature for the laundry. Also, using too much detergent may be the cause.
Why is washing performance poor with my Beko WTV77122BW1: stains persist or the laundry is not whitened?
If your Beko Washer's washing performance is poor with stains persisting or laundry not whitening, it could be due to insufficient detergent, so use the recommended amount. Avoid excessive laundry loads. Select the proper program and temperature. Ensure you're using the correct type of detergent. Too much detergent may also be the cause, so put the detergent in the correct compartment and avoid mixing bleaching agents and detergent.
Why does too much foam form in my Beko WTV77122BW1?
If too much foam forms in your Beko Washer, ensure you're using detergents appropriate for washing machines and only use a sufficient amount. The detergent may have been stored improperly, so store it in a closed, dry location and avoid excessively hot places. For meshed laundry, use smaller amounts of detergent. Put the detergent in the correct compartment. If softener is being taken early, there may be a problem in the valves or in the detergent dispenser, so call the Authorised Service Agent.
General| Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 84 cm x 60 cm x 49 cm |
| Weight | 62.5 kg |
| Maximum Spin Speed | 1200 rpm |
| Noise Level Spinning | 76 dBA |
| Programs | 15 |
| Water Consumption | 45 L |
To Next Page
