Installation RSPS20/25
Release
09
12/2019
41
Signal contact Connection type 2-pin terminal block
Tightening torque 3 lb-in (0.34 Nm)
Switching current max. 1 A
Switching voltage max. 60 V DC
max. 30 V AC
under UL conditions: max. 30 V DC,
resistive load
Pollution degree 2
Protection
classes
Laser protection Class 1 in compliance with IEC 60825-1
Degree of protection IP20
a. Reduction of the maximum permitted ambient air temperature under specific conditions
b. Temperature of the ambient air at a distance of 2 in (5 cm) from the device
c. Exclusively use SFP transceivers with the “EEC” extension, otherwise the standard
temperature range applies.
To Next Page
Loading...
Need help?
General
