4
Installation RSP20/25/30/35
Release
18
09/2021
2.3 Installing and grounding the device 37
2.3.1 Installing the device onto the DIN rail 37
2.3.2 Grounding the device 38
2.4 Installing an SFP transceiver (optional) 39
2.5 Connecting the terminal blocks 39
2.5.1 Supply voltage with the characteristic value K9 40
2.5.2 Supply voltage with the characteristic value KK 41
2.5.3 Supply voltage with the characteristic value CC 42
2.5.4 Supply voltage with the characteristic value TT 43
2.5.5 Signal contact 44
2.6 Operating the device 45
2.7 Connecting data cables 45
2.8 Filling out the inscription label 46
3 Making basic settings 47
4 Upgrading Software 49
5 Monitoring the ambient air temperature 50
6 Maintenance and service 51
7Disassembly 52
7.1 Removing the device 52
7.2 Removing an SFP transceiver (optional) 53
8 Technical data 54
8.1 General technical data 54
8.2 Dimension drawings 58
8.3 EMC and immunity 59
8.4 Network range 61
8.5 Power consumption/power output 65
8.6 Scope of delivery, order numbers and accessories 65
9 Underlying technical standards 68
A Further support 69
To Next Page
Loading...
