Belden RUS498X User Manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
RUS498X
PAGE 1 OF 7
V-3
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the swing is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP DO NOT RETURN TO THE STORE!

Belden RUS498X Specifications

General

Brand	Belden
Model	RUS498X
Category	Indoor Furnishing
Language	English

Summary

Assembly Steps Part 1

Step 1: Fasten Upright Supports

Fasten front and rear upright supports together at the top using bolts, washers, and plastic nuts.

Step 2: Mount Cross Beam

Insert upright supports into the top cross beam and tighten all plastic nuts and bolts.

Step 3: Attach Lateral Braces

Step 4: Secure Rear Cross Brace

Assembly Steps Part 2

Step 6: Attach Canopy Frame Connectors

Step 7: Insert Front/Rear Canopy Braces

Step 8: Connect Canopy Braces to Side Braces

Step 10: Fasten Canopy Frame Connectors

Assembly Steps Part 3

Step 11: Attach Seat Arms to Supports

Step 12: Mount Seat Assembly

Step 14: Connect Swing Arm Tubes

Step 15: Hook Suspension Springs

Hook suspension springs into the top holes of the swing arm tubes.

Assembly Steps Part 4

Step 16: Hang Suspension Springs

Hang suspension springs into holes in the angled braces on the top cross beam.

Step 19: Lock Safety Locks

Ensure safety locks are fully locked for swinging or open for bed position.

Final Assembly and Settings

Step 20: Secure Seat Assembly

Special Warnings and Safety

Important safety instructions regarding use, placement, and potential hazards.