Zone
The radio supports up to 32 zones, each of zone supports 16 channels, totally
512 channels supported. Enter “Zone” menu to select a desired zone.
Scan
1. Scan On/Off
While current channel add scan list and the list contain 2 channels at least, you
may enable the feature. Scanning allows the device to search the scan list
connected to the current channel to locate qualified channel for receiving or
voicing. During scanning, the icon “ ”flashes, when activities are detected on
a channel, the radio will stay on the channel to receive current activities, the icon
“ ”stop flashes. If you don’t want to receive activities on the channel, press the
programmed Nuisance Delete key to remove the channel from the scan list
temporarily. To exit the scanning process, enter scan menu, switch channel or
press the programmed Scan key.
Note:
● If the channel enables the feature “Auto Scan” via the programming software, switch
to the channel will enter scanning automatically;
● While button 1 or 2 programmed as Scan on/off, press it to enable scan feature.
2. View/Edit List
Allow a user to view/edit the scan list via menu, "View Member" allows a user to
view the scan member, deleting a member from the scan list; Add Member allow
a user to add a new member to the scan list, the list contain 16 channels at most.
It is not allowed to create a new scan list or delete existing scan lists from the
device. Digital and analog channel will be appear in the same scan list.
3. All Call（ ）
While the contacts type as group call, you can select the menu to view its ID or
press PTT to call.
13
To Next Page
Loading...
