Hold the supplied antenna by its
base, then screw it into the connector on
the top panel of the radio until fasten.
Turn the antenna anti-clockwise to
remove it.
Ａｔｔａｃｈｉｎｇ／Ｒｅｍｏｖｉｎｇ ｔｈｅ
ｂｅｌｔ ｃｌｉｐ
Ｉｎｓｔａｌｌａｔｉｏｎ／ ｒｅｍｏｖｉｎｇ ｔｈｅ
ａｎｔｅｎｎａ
Attach the belt clip using the two
supplied3*4mm binding screws.
Ａｔｔａｃｈｉｎｇ／Ｒｅｍｏｖｉｎｇ ｔｈｅ Ｓｔｒａｐ
Thread the hand strap to the loop back
of your two-way radio.
Installation of Accessories
02
To Next Page
