EasyManua.ls Logo

BelFone BF-TD930 - Getting Started and Basic Operation; Battery Management and Charging

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Note: Don’t attach / remove the battery if the radio turned on.
Battery Information
New battery is shipped not fully charged from the factory, please charge your
battery before using it, charging a new battery for 5 hours before initial use.
The maximum battery capacity and performance is achieved after three full
charge/discharge cycles. If you notice the battery power runs lows, please
recharge the battery.
Applicable Battery
To reduce the risk of injury, please only use the battery and charger specified
by BelFone, other batteries may burst, causing bodily injury and property
damage.
Battery Tips
1. When charging your battery, keep it at a temperature among 5℃ to 40℃.
Temperature out of the limit may cause battery leakage or damage.
2. When charging a battery attached to a radio, turn the radio off to ensure a
full charge.
3. Do not cut off the power supply or remove the battery when charging a
battery.
4. Never charge a battery that is wet, please dry it with soft cloth prior to
charge.
5. Even if the battery is full charged, the operating time is noticeably shorter

Related product manuals