44
●
Emergency Priority Interrupt: If there is an active call on current channel, and
a user with higher priority level to send emergency service will terminate the
ongoing activity automatically.
●
Message Priority Interrupt: If there is an active call on current channel, and a
user with higher priority level to send a short message will terminate the
ongoing activity automatically, so as to make sure the message is sent
successfully.
●
Kill Priority Interrupt: If there is an active call on current channel, and a user
with higher priority level to send kill command will terminate the ongoing
activity automatically, so as to make sure the kill command is sent
successfully.
●
All Call Priority Interrupt: If there is an active call on current channel, and a
user with higher priority level to initiate an all call will terminate the ongoing
activity automatically.
Note: This function is available only in digital channel.
Time Out Timer (TOT)
The purpose of TOT is to prevent any user occupy a channel for an extended
period. If a channel is busy, the time will be shorter. If the preset time expires,
the radio will generate beep and terminate transmission automatically.
To Next Page
Loading...
