24
can enable the microphone of the target radio, and monitor
its activities.
Device Enable Device Enable: Allow a user to send "Device enable"
command to the target killed device, to allow it to be used
normally.
Device Disable Allow you to send the Radio Disable command to a private
contact to disable its radio, except remote monitor, all other
functions are disabled, The radio must be reprogrammed
for reuse or enabled by the Radio Enable command.
●
Edit Name: Modify the name of a private call contact. Press” *” key to delete,
press “#” to switch input method, name input 16 characters at most.
●
Edit Number: Modify the number of a private call contact, the available
number range is 1~16776415.（if private call contact is set as channel default
address or call number on one touch call, its unable to edit number）
●
Delete: Delete unwanted contacts from the address list, if private call contact
is set as channel default address or call number on one touch call, its unable to
delete.
3. New Group
Allow you to create a new group via menu, input the name then press confirm
key to save, and you can edit the name or delete it.
4. New Contact
To Next Page
Loading...
