Need help?Do you have a question about the BELIMED WD425E and is the answer not in the manual?
Ensures all surfaces are accessible for cleaning and disinfection liquids, with attention to lumens and disassembly requirements.
Guidelines on process parameters like time, temperature, and additives, emphasizing chemistry and mechanics need time to develop effectiveness.
Details on cleaning flexible endoscopes, including pre-cleaning, leak tests, and manual cleaning procedures.
Prerequisites for effective machine cleaning, focusing on rack loading and spray arm rotation.
Discusses the effect of rack loading characteristics on dryer performance, particularly for hoses and hollow items.
Details on the display status during normal operation, including 'Program ready' and checking date/time.
Instructions on how to launch programs using keys or automatic detection, and display indications during program execution.
Procedure for identifying users via keyboard or barcode reader for batch documentation.
Process for identifying wash goods carriers by keyboard or barcode reader for batch documentation.
Procedure for importing wash goods content (e.g., sieve trays) via keyboard or barcode reader for batch documentation.
Steps for identifying endoscopes, reading batch content, and handling errors during the process.
Describes the display message 'Dosing Agent x empty', its cause, and remedies for the dosing module.
Explains the 'Door Lock' display message, its purpose as a safety precaution, and how to open the door.
Details the 'Sensor Difference is too large' error, its cause related to temperature sensors, and troubleshooting steps.
Indicates 'Periodical Service' messages displayed after a certain number of batches or operating hours.
Explains the 'Peak Load Cut-off' display message related to peak load management and user release.
Provides a checklist of 11 potential causes when the machine does not wash properly.
Outlines daily checks for the wash chamber, sieve system, and additive levels to ensure immaculate results.
Describes the process validation requirements and routine test procedures according to CEN norm.
General| Manufacturer | Belimed |
|---|---|
| Type | Washer-disinfector |
| Power consumption | 12 kW |
| Application | Medical, laboratory |
| Power supply | 400 V, 50 Hz |
| Max spin speed | Not applicable |
| Noise level | 65 dB |
To Next Page
