1110
Installing and Setting up the Card
10
3.1 After restarting your computer,
double-click the Wireless
Networking Utility (WNU) icon
on the desktop screen.
3.2 The WNU screen will appear.
3.3 Select a network to connect to from
the “Available Networks” list and
click “Connect”.
Note: In order to see your available
networks, you must be near a working
wireless router.
3.4 The WNU icon can also be
found on the system tray.
Note:Double-clicking on the WNU icon
on the system tray will bring up the
“Utility” screen.
Installation is now complete.
Step 3 Use the Belkin Wireless Networking Utility
11
To Next Page
Loading...
