Bell B45E 6X6 ADT User Manual

O
P
E
R
A
T
O
R
'
S
M
A
N
U
A
L
E
#
A
D
T
'
S
&
H
A
U
L
E
R
S
9
9
OPERATION
OPERATING COMPONENTS
to the left turn position, the left hand side indicator
lights will flash while the right hand side indicator
lights will be ON continuously.
Bin Raised Warning Light
As a safety precaution it is recommended that the
operator should not drive the machine when the bin
raised warning light (2) is illuminated as this may cause
serious damage to the machine and/or injury to
personnel.
Tip Control Lever in this Chapter for special
instructions regarding driving the machine while the
bin is raised. The bin raised warning light will
illuminate when the bin is raised.
NOTE
Gear restriction will occur while the bin is
up.
High Beam Indicator Light
The high beam indicator light (3) illuminates when
the high beam mode on the headlights is selected
on the steering column switch
Control Traction Diff Lock Light
The Control Traction Differential Lock Light will
illuminate when the differential lock switch on the
SSM is activated. It is an indication of air being
applied to the differential lock actuators.
Park Brake Warning Light
The park brake warning light illuminates when the
park brake is applied and extinguishes when it is
released.
Inter-Axle Diff Lock Light (ADTs Only)
Do not operate the machine on hard surfaces with the
inter-axle differential lock engaged.
Damage to the drive train may result if this caution is
not observed.
The inter-axle differential lock light (6) illuminates
when the longitudinal differential lock is engaged.
To engage inter-axle differential lock, the IDL switch
must be activated and the accelerator must be
released briefly.
The machine can be moving at any speed.

Bell B45E 6X6 ADT Specifications

General

Brand	Bell
Model	B45E 6X6 ADT
Category	Trucks
Language	English