To Next PageTo Next Page
Need help?Do you have a question about the Bell B40E 6X6 ADT and is the answer not in the manual?
Details of front and rear suspension types for different models.
Provides specifications for Mercedes-Benz engines used in ADTs.
Lists ADT models and their corresponding transmission models.
Identifies internal components within the operator's station.
Details the extensive adjustability of the operator's seat for comfort and control.
Explains adjustments for air dump, shock absorber, height, lumbar, heating, and suspension.
Explains armrest adjustment and seat belt fastening/releasing.
Details the process for starting and stopping the engine, including auto-crank.
Explains main, engine fault, battery charge, and brake pressure warning lights.
Details the layout and identification of controls in the operator's station.
Describes how to adjust armrests and the back rest for optimal posture.
Explains the function and activation of the emergency stop button.
Explains the function of hazard lights and park brake switches.
Details the operation of air conditioning, recirculation, fan speed, temperature, and air direction switches.
Explains the air conditioner, fresh air supply, and vent controls.
Provides an overview of the SSM layout and the function of each switch.
Explains the three security levels and how access codes work.
Identifies the ignition on/start and ignition off/stop switches.
Explains the function and usage of the inter axle differential lock.
Describes how to lock the transmission in a selected gear.
Provides a list and description of various warning and indicator lights.
Step-by-step guide for tilting the cab up for access.
Step-by-step guide for lowering the cab back down.
Details the procedure for disengaging the over centre bin lock.
Step-by-step guide to engage the over centre bin lock for safety.
Emphasizes reading the manual and following safety warnings.
Outlines the procedure for daily pre-operation checks.
Details forward, reverse, controlled gear range, and downshifting procedures.
Outlines steps for emergency braking using park brake if service brakes fail.
Covers site-specific safety rules, speed limits, and hazard awareness.
Covers safe driving practices, checks, and awareness.
Explains the use of service brakes, park brake, and their interrelation.
Advises on when and how to use the IDL, and its interaction with ATC.
Lists pre-start checks and operator seat adjustment.
Details the correct procedure for shutting down the engine, including turbo spin-down.
Step-by-step guide for starting the engine, including security code entry.
Details Hill Assist function and general slope driving precautions.
Provides the procedure for positioning and loading the machine.
Step-by-step instructions for manually lowering the bin after a failure.
Explains normal steering operation and the emergency steering system.
Details safe practices for driving uphill, including traction control.
Reinforces safety measures for downhill driving, including retarder use.
Provides critical safety advice and procedures for downhill driving.
Safety and operational advice for off-road driving conditions.
Critical safety warnings and procedures related to tipping.
Details safe practices for loading and tipping operations.
Introduces general service procedures and information sources.
Directs users to information regarding fluids and lubricants.
General guidelines for performing service checks.
Explains how to check the engine coolant level safely.
Step-by-step guide for checking transmission fluid level.
Step-by-step instructions for checking hydraulic oil level using the CDU.
Procedures for checking engine components and fluids.
Details the procedure for testing the service brake accumulator system.
Details how to check the engine oil level using the dipstick.
Procedure for checking the transmission for oil leaks.
Explains how to check the transmission fluid level using the CDU.
Details how to check the hydraulic oil level.
General