Bell B45E 6X6 ADT User Manual

OPERATOR'S MANUAL
BN039465 Rev B (August 2016)
E# ADT'S & HAULERS
LARGE TRUCKS PIN 1.1
Original Instruction
DISCLAIMER:
Due to BELL EQUIPMENT’S policy of continuous product improvement, the
information contained in this manual was correct up to the time of printing (issue
date of manual). Any changes after this date will only be included in the next
update of this manual.
The illustrations in this manual are pictorial and not necessarily true
representations of components. Photographs and illustrations may show optional
equipment.
Copyright © 2016
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying or otherwise, without prior written permissionof
BELL EQUIPMENT COMPANY SA (PTY) LTD as the copyright holder.

Bell B45E 6X6 ADT Specifications

General

Brand	Bell
Model	B45E 6X6 ADT
Category	Trucks
Language	English

Summary

Machine Specifications

Key Machine Data

Covers intended use, operating temperature, and fuel specifications.

Drivetrain and Chassis Details

Details wheels, axles, suspension, and transmission systems.

Engine and System Specs

Covers engine details, travel speeds, and electrical systems.

Structural and Fluid Information

Includes frame, body, lifting points, mass, hydraulics, and lubricants.

Operating Components

Operator Station Overview

Overview of the operator's station, steering wheel, and SSM.

Seat and Steering Adjustments

Details on adjusting the operator seat and steering wheel.

Cab Systems and Features

Covers HVAC, interior lights, power sockets, and storage.

Machine Operation Controls

Details bin controls, transmission, speed, safety, and emergency systems.

Operating Instructions

Safety and Basic Operation

Covers general safety, engine start-up, shutdown, and running-in.

Driving and Gear Management

Details driving safety, gear shifting, speed, and retarder control.

Braking and Slope Handling

Covers braking systems, slope operation, and emergency braking.

Load Handling and Specific Procedures

Details bin lowering, loading, tipping, and off-road operations.

Service and Checks

Daily Service Procedures

Outlines daily and 10-hourly service checks for qualified personnel.

Engine and Fluid Checks

Covers engine oil, coolant, air intake, and fuel filter checks.

Transmission and Braking Systems

Details transmission checks, heat shields, and brake accumulator test.

Lubrication and Component Checks

Covers lubrication, cab, electrical, oscillation joint, and tailgate checks.

Service Information

General Service Information

Provides general guidelines for service operations.

Fluids and Lubricants Information

Details required fluids and lubricants for maintenance.