To Next PageTo Next Page
Need help?Do you have a question about the Bell B35E 6X6 ADT and is the answer not in the manual?
Details the primary purpose of the machine for bulk material handling and transport.
Specifies the safe operating temperature limits for the machine.
Outlines the recommended fuel specifications, including sulphur content.
Lists the tyre sizes available for different ADT models.
Details the axle specifications for various machine models.
Describes the front and rear suspension systems used on the machines.
Lists the transmission models used in the ADT series.
Provides details on the engine specifications for different machine models.
Lists the forward and reverse travel speeds for each ADT model.
Details the components and specifications of the electrical system.
Lists the transfer case models used in the ADT series.
Describes the steering system and turning radius specifications.
Details the types and specifications of the service, park, and auxiliary brakes.
Specifications for the optional rear view camera system.
Details on the cab, chassis construction, and bin materials.
Specifies lifting points for safe machine handling.
Details on retrieval points for machine recovery.
Specifies tie-down points for securing the machine.
Information on the bin tip cylinders and tipping angles.
Provides empty and fully laden mass specifications for ADT models.
Details on the hydraulic system components and capacities.
Information on the pneumatic system reservoir capacity.
Specifies external and internal sound power levels.
Lists fluid capacities for various machine systems.
Details approved lubricants and their specifications for machine systems.
Specifies grease types and operating temperature ranges.
Details grease requirements for the PTO Propshaft.
Specifies requirements for diesel fuel, especially for Stage 4/Tier 4f.
Information on the SCR system and AdBlue/DEF usage.
Provides detailed dimensional data for the B35E ADT model.
Provides detailed dimensional data for the B40E ADT model.
Provides detailed dimensional data for the B45E ADT model.
Provides detailed dimensional data for the B50E ADT model.
Provides detailed dimensional data for the B60E ADT model.
Details on internal components within the operator's cab.
Description of the operator's environment and controls.
Information on the steering wheel and its functions.
Details on the adjustable operator seat and its features.
Information on the HVAC system for cabin climate control.
Location and function of the emergency stop button.
Overview and functions of the Sealed Switch Module.
Details on security access codes and driver identification.
Explanation of dashboard warning and indicator lights.
Operation of the switches for raising and lowering the bin.
Functionality of the i-Tip switch for various assist features.
Procedure for engaging and disengaging the articulation safety bar.
Procedure for engaging the bin prop for safety.
Essential safety guidelines for operating the machine.
Specific safety rules and restrictions for site operations.
Procedures for daily pre-operation checks.
Step-by-step guide for engine start and shutdown.
Detailed procedure for safely shutting down the engine.
Key safety practices for machine operation and driving.
Information on transmission gear selection and operation.
Operation and interaction of service and park brakes.
Guidelines for using the inter-axle differential lock.
Procedure for safely loading material into the machine.
Instructions for raising the machine's bin.
Instructions for lowering the machine's bin.
Emergency procedure for lowering bin after system failure.
Details on normal and emergency steering systems.
Guidelines for safe operation on inclined surfaces.
Specific procedures for operating in off-road conditions.
Procedures for loading and tipping material safely.
Guidelines for machine preservation and storage.
Methods for securing the machine during parking and storage.
General instructions for performing service tasks.
Procedures for checking engine components and levels.
Guidance on checking engine oil levels correctly.
Procedure for checking engine coolant level.
Inspection of the engine air intake assembly for damage.
Procedures for checking the transmission system.
Method for checking the transmission fluid level.
Details on lubrication points and systems.
Checks for the machine's cab and electrical components.
Procedure for daily greasing of the oscillation joint.
Procedure for checking the hydraulic oil level via CDU.
Checks for the tailgate system and leaf springs.
General