Bell B35E 6X6 ADT User Manual

OPERATION
OPERATING INSTRUCTIONS
Do not exceed the maximum floor load when
operating indoors.
Ensure that there is enough space overhead to
raise the bin to the maximum position.
Preservation And Storage of Machine
Short-term storage covers periods up to two
months and long-term storage periods exceeding
two months.
The intended safe storage temperature range of a
standard machine is -20 ˚C to 45 ˚C
Short Term Storage of Machine
Overnight Parking
When the machine is to be parked overnight the fol-
lowing must be done:
• Ensure the machine is unloaded.
• Park the machine on firm level ground.
• Move all the switches to the OFF position.
• Ensure the transmission is in Neutral N.
• Ensure the park brake is applied.
• Shut down the engine.
• Lock the cab door.
• Ensure the battery box is locked.
• Ensure that the fuel cap and the bonnet release
levers are locked.
Long Term Storage of Machine
The following must be done to the machine prior to
storage.
• Wash the machine and touch up the paint finish
to avoid rusting.
• Treat exposed parts with anti-rust agent, lubricate
the machine thoroughly and apply grease to un-
painted surfaces such as lifting and tilting cylin-
ders. Pull the pistons in the hydraulic cylinders in
as far as possible and coat the chrome with a vis-
cous lubricant.
• Inflate the Tyres to the recommended tyre
pressure.
• Fill the fuel tank and the hydraulic oil tank to the
maximum marks.
• Check the anti-freeze properties and drain fluids
as appropriate.
• Cover the exhaust pipe (when parked outdoors
forsometime).
• Use inhibitor paper to protect the paint work of
the machine.
• Grease all greasing points.
• Use a suitable coating to protect all rubber
surfaces.
• Use a thin film of oil on all exposed metal
surfaces.
• Batteries to be removed and maintained off-site.
Removal of Preservation Material
The following must be done to the machine prior to
use (After long term storage).
• Unwrap inhibitor paper.
• Clean all grease nipples at the greasing points
and grease the machine.
• Wash all rubber and exposed metal surfaces us-
ing a suitable detergent.
• Wash the machine and touch up the paint finish
to avoid rusting.
• Inflate the tires to the recommended tyre
pressure.
• Fill the fuel tank and the hydraulic oil tank to the
maximum marks.
• Check the anti-freeze level and replenish if
required.
• Remove the cover from the exhaust pipe.
Crime Prevention Tips
• Keep proof of ownership.
• Mark the machine with your own unique number-
ing system.
• Take photographs from several angles of your
machines.
• Maintain an up-to-date inventory of your ma-
chines. Keep your documented identification
numbers, photographs and inventory in a safe
and secure location.
1
3
8
E
#
A
D
T
'
S
&
H
A
U
L
E
R
S
O
P
E
R
A
T
O
R
'
S
M
A
N
U
A
L

Bell B35E 6X6 ADT Specifications

General

Brand	Bell
Model	B35E 6X6 ADT
Category	Trucks
Language	English