Bell EXPRESSVU Installation Guide

Page I-62
Installation Guide
SMART CARD
The Smart Card identifies your receiver to the Bell ExpressVu network.
The Smart Card authorizes descrambling of the satellite signal, and authorizes purchases
using the receiver. Your receiver will not work without the Smart Card that was shipped
with it. You cannot use a Smart Card that was shipped with another system in your
receiver.
Be careful not to bend or damage your Smart Card. Your Smart Card is not
covered by your Limited Warranty. If you lose or damage your Smart Card,
you will be charged a replacement fee.
When you first install your receiver, make sure that the Smart Card is firmly inserted into
the slot behind the access door of the receiver.
BELL EXPRESSV
U CUSTOMER SERVICE
CENTRE SECURITY
You can set up a Personal Identification Number (PIN) that is assigned to your account at
the Bell ExpressVu Customer Service Call Centre Thereafter, this PIN will be requested
by the Bell ExpressVu Customer Service Call Centre to authorize any transactions to
your account. This includes purchasing services, account inquiries, and overriding the
receiver security password.
You can select the PIN when you first turn on your service, or at any time thereafter.
If you forget your PIN, you will need to speak with a Bell ExpressVu
Customer Service Representative at 1-888-SKY-DISH. The Bell ExpressVu
Customer Service Representative may ask for additional information to
confirm that you are authorized to make transactions on your account.

Bell EXPRESSVU Specifications

General

Category	Satellite TV System
Provider	Bell
Name	EXPRESSVU
Service Provider	Bell Canada
Interactive Features	Pay-Per-View
Equipment Required	Satellite dish
Service Type	Direct Broadcast Satellite (DBS)