17
D22001250 v.1 - UPD 191201
INTRODUCTION
BELL® log splitters have been designed and manufactured in compliance with the most recent European safety regulations with particular
reference to the EN609 and UNI60204 standards.
The ZHB control systems have been designed and engineered so that the operator is forced to work in the safety area without any
possibility of inserting hands or arms in dangerous areas.
Before transporting, installing or operating the machine, read all parts of this manual, paying particular attention to the specific safety
regulations.
Operators who are unable to understand any of the languages in which this manual is written are responsible for asking the retailer to
provide a manual in their own language.
The operator must also train any other person authorised to use the machine.
Failure to comply in any way with these instructions, improper use of the machine, extraordinary maintenance operations
not carried out by skilled, authorised personnel, removal of data plates or markings of any type, removal or tampering with
the guards and safety mechanisms of the machine or any other action not expressly authorised that may impair the active
and passive safety systems of the machine shall relieve the manufacturer of all and any liability and may result in serious
injury and damage.
If the machine is tampered with in any way by unauthorised personnel, the guarantee is automatically null and void. This manual is an integral
part of the machine and must accompany it even in the case of transfer of ownership.
1 - DESCRIPTION OF THE MACHINE
The SPV 21 and SPV 40 vertical, transportable logsplitters are equipped with their own electric motor. The various parts of the machines are
shown in fig. 1a and 1b.
1 - Wedge
2 - Telescopic mast
3 - ZHB control levers
4 - Carrying handle
5 - Work surface
6 - Locking lever of the work surface (only on SPV40 model)
7 - Electric motor
8 - Wheels for minor movements
9 - Oil plug
10 - Oil tank
11 - PERMITTED AND MANDATORY WORK AREA