Bell TURBO 7 User Manual

© 2006 BELL - D22000417 ver.2 - UPD 030706
TURBO 7
MANUALE DI USO E MANUTENZIONE
MANUAL FOR USE AND MAINTENANCE
WARTUNGS-UND BETRIEBSANLEITUNG
LIVRET D'EMPLOI ET D'ENTRETIEN
ONDERHOUDSHANDLEIDING
BRUKSANVISNING
BRUKER- OG VEDLIKEHOLDSVEILEDNING
VEDLIGEHOLDELSE OG BETJENINGSVEJLEDNING
KÄYTTÖOHJEKIRJA
MANUAL DE USO Y MANTENIMIENTO
MANUAL DE USO E DE MANUTENÇÃO
VALID FROM
s/n 464355
s.r.l.
BY

Bell TURBO 7 Specifications

General

Brand	Bell
Model	TURBO 7
Category	Log Splitter
Language	English

Summary

INTRODUCTION

DESCRIPTION OF THE MACHINE

1.1 Symbols used

Standard graphic symbols used on machines for safety.

TECHNICAL DATA

2.1 Size of the logs to be split

Maximum log sizes that can be split.

2.2 Recommended oils

Recommended hydraulic oil types for the cylinder.

SAFETY

3.1 General safety regulations

Rules for safe operation and preventing injury.

OPERATING THE MACHINE FOR THE FIRST TIME

4.1 Lighting

Requirements for adequate lighting during operation and maintenance.

USE

ROUTINE MAINTENANCE

6.1 How to change the hydraulic oil

Procedure for replacing used hydraulic oil.

6.2 Refilling the hydraulic oil

How to check and refill hydraulic oil level.

6.3 Sharpening the wedge

Instructions for sharpening the splitting wedge.

TROUBLESHOOTING

7.1 How to free a jammed log

Steps to safely remove a log stuck in the splitter.

7.2 Troubleshooting

Table of common problems, causes, and corrective actions.

SCRAPPING AND DISPOSAL OF THE MACHINE

GUARANTEE

SPARE PARTS