19
D22001250 v.1 - UPD 191201
2 - TECHNICAL DATA
Noise ≤ 79 dB(A) measured at the height of the operators ear in the working position with the log splitter in operation
• The ears must be suitably protected (ear defenders).
TECHNICAL DATA
SPV21 E SPV21 T SPV40 E SPV40 T
Lenght (mm) 700 700 700 700
Widht (mm) 515 515 515 515
Height (mm) 1046÷1556 1046÷1556 1046÷1556 1046÷1556
Weight (kg) 96 96 108 108
Max. pressure working (bar) 220 200 220 200
Max. force (tons.) 6 6 6 6
Log capacity (mm) 540 540 1040 1040
Diameter of the log to be split (cm) 10÷30 10÷30 10÷30 10÷30
Hydraulic oil tank capacity (lt.) 3,2 3,2 3,2 3,2
Hydraulic oil total capacity (lt.) 4,2 4,2 4,2 4,2
Supply 230V 50Hz Single-ph. 400V 50Hz 3-phase 230V 50Hz Single-ph. 400V 50Hz 3-phase
Absorption 13.5A 6A 13.5A 6A
Power 3Hp - 2.2KW 4Hp - 3KW 3Hp - 2.2KW 4Hp - 3KW
2.1 - Size of the logs to be split
Figure 2 on page 2 shows the maximum log sizes that can be split.
The diameter of the log is indicative: a small log can be difficult to split if it has knots or a particularly tough fibre. On the other hand, if the
wood has regular fibres it is not difficult to split logs with diameters greater than the maximum shown in Figure 2. It is important not to
insist when the log does not split on the first attempt, as the pump may be damaged by the overheating of the oil when the
machine is made to work under the maximum stress in the attempt to split excessively hard wood.
2.2 - Recommended oils
We recommend use of the following oils for the hydraulic cylinder:
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
MOBIL DTE11 or equivalent
DO NOT USE OTHER GRADE OILS.
To Next Page
Loading...
Need help?
General
