18
D22000431 v.0 - UPD 051213
2 - TECHNICAL DATA
Noise ≤ 85 dB(A) measured at the height of the operator’s ear in the working position with the log splitter in operation
• The ears must be suitably protected (ear defenders).
2.1 - Right way to lift the machine
The machine must be lifted by means of lifting hooks with capacity bigger than 100 Kg. that must be fi xed in the hitch points (fi g.13, page 4)
2.2 - Size of the logs to be split
Figure 2 on page 2 shows the maximum log sizes that can be split.
The diameter of the log is indicative: a small log can be diffi cult to split if it has knots or a particularly twisted fi bre.
2.3 - Recommended oils
We recommend use of the following oils for the hydraulic cylinder:
SHELL TELLUS S2 V 22
ARAL VITAM GF22
BP ENERGOL HCP22
TEXACO RANDO HDZ 22/32
MOBIL DTE11 or equivalent
DO NOT USE OTHER GRADE OILS.
3 - SAFETY
The information given in the chapter is extremely important for safety purposes. It describes possible hazards tied to use of the machine
and instructions for correct use of this to avoid injury or damage.
WARNING: This log splitter has been designed and manufactured to split logs of the sizes recommended only (fi g.2 page 2).
Use of the machine for any other purpose shall be considered improper and the manufacturer shall not be liable for any injuries or damage
to be ascribed to improper use of the machine.
The operator must only work in the position shown in fi g.1, pos.10, and only operate the machine drive control with both hands without
using other improvised systems and without tampering with the controls.
When the machine is working, persons and animals must be kept at a distance of at least 5 meters from the machine.
NEVER ATTEMPT TO TAMPER WITH THE PROTECTIONS OF THE LOG SPLITTER OR TO OPERATE THE MACHINE WITHOUT THESE. FAI-
LURE TO COMPLY WITH THE INSTRUCTIONS GIVEN IN THIS CHAPTER MAY RESULT IN SERIOUS INJURY OR DAMAGE TO PERSONS,
THINGS AND TO THE MACHINE.
Do not use the log splitter to break stone materials (stones, concrete, etc.). Or to crush pieces or metal containers.
TURBO 8 TURBO 8 TURBO 8
E B&S HONDA
Lenght (mm) ~ 1190 ~ 1190 ~ 1190
Widht (mm) ~ 604 ~ 604 ~ 604
Height (mm) ~ 1020 ~ 1020 ~ 1020
Weight (Kg) ~ 80 ~ 80 ~ 80
Max. force (tons.) ~ 7 ~ 7,5 ~ 7,5
Log capacity (mm) ~ 520 ~ 520 ~ 520
Hydraulic oil capacity (Lt.) ~ 7 ~ 7 ~ 7
Supply 250V 50Hz 1-phase Premium graded fuel Premium graded fuel
Absorption 14 A —— ——
Power 3 HP - 2,2 kW 5 HP - 3,7 kW 4,8 HP - 3,6 kW
ENGLISH
To Next Page
Loading...
