Bellezza Inizio R - Set Up and Connect the Machine; Machine Setup Location; Connect Water Supply

SET UP AND CONNECT THE MACHINE
Set up the machine
► Choose an easily accessible installation location with a level,
stable and sufficiently large surface.
► A mains socket must be available for the electrical
connection.
► Make sure that people walking by cannot knock over the
machine.
Connect the mains water supply
(only for Inizio R, Inizio R Leva)
DANGER
Water pipe is under pressure
A burst hose or leaky connections can cause water damage.
► If you are unsure, contact a specialist company or a
suitably qualified person.
The Inizio R and Inizio R Leva models have a permanent water
connection. The water is supplied directly via the water
connection.
Connect the water pipe
1.
2.
3.
4.
11 / 32
Espresso machines | Bellezza
Set up and connect the machine
Connect the water inlet of the machine with a hose to the
end of your faucet.
Turn on the machine.
The machine will show the code F03.
After a short time, the machine will automatically use the
water inlet.
CAUTION: The water tank must not be removed.