Connect the machine electrically
► Make sure that the values for the mains voltage and mains
frequency specified on the type plate match the mains at the
installation site.
► Only connect the machine to an earthed mains socket. If you
are unsure, contact an electrician or your dealer.
► Insert the power plug into the socket.
Prepare the machine
Fill the water tank
1. Open the cover (Fig. 2: 16) and remove the water tank.
2. Clean the water tank with hot water and a little washing-up
liquid.
3. Put the water tank down, fill it with clear, cold water up to
the maximum level and close the cover again.
Clean portafilter and tamper
► Also clean the two portafilter and the tamper before first
use.
Use softened water. This will prevent the machine from
calcifying prematurely.
Do not use pure or distilled water!
12 / 32
Bellezza | Espresso machines
Set up and connect the machine
To Next Page
Loading...
