Bellfires Derby - Page 37

38
Bellfires
English
Instructions for use and installation instructions
FIG.
NO.
25
26
27
28
29
30
31
32
33
34
35
36
37
DESCRIPTION
Ceiling plate for transition Ø100 mm / Ø150 mm rigid -
Ø100 mm (flex.).
Stainless steel adapter piece (100) from fire to flexible, Ø100
mm external (rigid) x Ø107 mm internal (flex.). [appliance -
Ø100 mm flex.] and [Ø100 mm rigid - Ø100 mm flex.].
Stainless steel adapter piece (150) fire to flexible,
Ø148 mm external (rigid) x Ø148 mm internal (flex.)
[appliance - Ø150 mm flex.].
Stainless steel locking band Ø150 mm. For adapter 150
[appliance - Ø150 mm flex.] Screw-fastening
Stainless steel screws Ø3.5 mm x Ø9.5 mm.
For securing the flexible concentric flue.
(Minimum 3 screws per connection)
Hose clamp Ø100 mm. (Minimum 2 per connection)
Hose clamp Ø150 mm. (Minimum 2 per connection)
Vertical (roof) termination kit, L = 610 mm (vertical), incl.
 and . For the flexible flue system.
Concentric T-piece with gauging orifice, incl. ,  and 
Concentric pipe with gauging orifice, L=165 mm, incl. ,
 and 
90° concentric bend with inspection p anel incl. ,  and 
Universal wall / floor support Ø150 mm
“Snorkel” wall outlet set for Smart Bell
ART. /
ORDER
NO.
302189
302278
302279
302217
303776
304041
304042
302307
302301
302302
302303
310192
319862
Color(*) Application
RVS antr RIGID FLEX
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
If the appliance has been ordered with the BARBAS concentric flue/chimney system,
a concentric Bellfires adapter will be supplied free of charge.
(*) : Color: RVS: Stainless steel self-colour, polished
antr.: Anthracite colour lacquer, matt
(**) : Adjustable roof flashing for a slope > 45° can be supplied on request.
When installing a balanced-flue “closed” gas fire in an existing chimney, ensure
stainless steel flexible liners conforming with BS 316 are used to conduct the spent
gases.
The room-sealed gas appliances have been approved in combination with the
BARBAS or ONTOP (RIGID and FLEXIBLE) CONCENTRIC FLUE SYSTEM
Ø100 mm - Ø150 mm according to the European CE norm for gas appliances
and may therefore be used only in combination with this flue system.