66
Bellfires
English
Instructions for use and installation instructions
The following restriction plate is supplied:
l Jersey
l Vertical Bell Small
l Vertical Bell Tunnel
l Horizon Bell Medium
3.5.7 Checking the appliance following installation
After installation, visually check the gas flame. When the fire is ignited, the flames
should be short and blue/yellow in colour. These flames should gradually increase in
height and become more yellow. When all flames are yellow, the gas fire has reached
the correct temperature.
THE GAS FIRE IS NOW READY FOR USE
Restriction plate:
Width: B = 30 mm
To Next Page
Loading...
