USING THE HOBUSING THE HOB
timer selection key again (as long as no
value was set) the next active cooking
zone can be selected.
Setting a timer value
•Bypressingthetimerkeys,atimer
value can be set. If the timer-plus-key is
pressedrstthedisplaystartswith1min
and can be increased in 1min steps. If the
timer-minus-keyispressedrstthetimer
startswith15minandcanbedecreased
in 1 min steps.
•Pressingthekeypermanentlyspeedsup
the timer adjustment. The speed will also
increase while the key is held. (the time
between two time steps reduces).
•Ifatimerhasexpiredthetimeralarmis
activated and the assigned cooking zone is
immediatelyswitchedo.
•Thecookingzonedisplayshows0orH.
If no user input stops the alarm
signal it will be on for maximum 2
minutes.
The alarm can be deactivated
byswitchingothecontrol
using the main switch or by
pressing the two timer keys or
it will be deactivated automatically after 2
minutes.
Switching o a timer or changing the
time setting
Thetimervaluecanbemodiedatany
time by selecting the timer and then by
pressing the (+ or -) timer key.
To stop an active timer the value can be
set to 0. Pressing Plus and Minus simul-
taneously for 2 seconds also resets the
timer value to 0.00.
Minute Minder
The minute minder buzzes when the time
sethasexpired.Itdoesnotswitchoany
zone.
To operate:
1)Turnonthehob,usingtheon/okey.
2) Select the timer by pressing the + and
- keys together (do not activate any cook
zone).
3) Set the right hand digit up to 9 minutes
(Single Minutes Units) and wait a couple
of seconds.
4) The display will now indicate for you to
set the left hand digit, up to 90 minutes
(10 Minute Units).
5)Thetimerisnowsetandbeginscount-
ing down. (No zone indicator light should
be set).
6) You can now use the hob as normal.
When the time is up.
1) The corresponding indicator in the
timerdisplaywillash,thetimerwillbeep.
2) Touch any control to stop the beeping.
Warning!
Never leave the hob unattended when in
use, even when you have set the timer to
turnothecookzone.
Additional timer information
To modify or cancel a timer setting follow
steps1)to5)above.
To set the timer for additional zones follow
steps1)to5)above.
If multiple zones have been set for timed
operation , the timer display will always
display the time for the cook zone with
the shortest time remaining.
Tocheckthetimersettingforadierent
cook zone, simply select the required cook
zone,theremainingtimewillbrieyap-
pear in the timer display.