EasyManua.ls Logo

Belling BFS60DODF - Installation Warnings

Belling BFS60DODF
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 7
be taken while cleaning to avoid scratching. Avoid
hitting or knocking the glass with accessories.
Make sure that the supply cord is not trapped or
damaged during installation. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to prevent a hazard.
Do not let children climb on the oven door or sit on it
while it is open.
If your appliance is provided with a cooking hotplate
made of glass or glass ceramic:
CAUTION: “In case of hotplate glass breakage”:
- immediately shut off all burners and any electrical
heating element and isolate the appliance from the
power supply
- do not touch the appliance surface
- do not use the appliance.
Please keep children and animals away from this
appliance.
1.2 Installation Warnings
Do not operate the appliance before it is fully
installed.
The appliance must be installed by a licensed
electrician. The manufacturer is not responsible for
any damage that might be caused by incorrect
placement and installation by unauthorised people.
When the appliance is unpacked, make sure that it
is has not been damaged during transportation. In
the case of a defect do not use the appliance and
contact a qualified service agent immediately. The
materials used for packaging (nylon, staplers,
styrofoam, etc.) may be harmful to children and they
should be collected and removed immediately.

Related product manuals