USING THE HOB - ELECTRIC (CERAMIC)
WARNINGS
• Do not use the ceramic hob if the
glass surface is cracked, as electrical
parts are directly beneath. Switch
off the appliance at the supply to
prevent electric shock and contact
your supplier.
• The hob surface remains hot after
use. DO NOT TOUCH.
• The appliance is not intended to be
operated by means of an external
timer or separate control system.
Using Rotary Controls
• Select the element you wish to use,
place the pan on and turn the control
knob to the power setting you wish
to use.
• To switch off, turn the selected con-
trol knob to the ‘off’ position.
Notes on use
• The power settings on the hob do
not indicate any set temperature and
cannot be used to judge one element
against another.
• During cooking, the elements will
cycle on and off. This is to prevent
the hob from overheating.
Hot Hob Warning (if fi tted)
The surface of the hob gets hot in use.
Your hob may have:
•The word “hot” written on it, as a cau-
tionary note that the surface will become
hot during use.
•The word “hot” written on it, with the
addition of a light beneath it. This light
will illuminate when any element is used
and remains lit for a while after all ele-
ments have been switched off to show
that the surface may still be hot to touch.
To Next Page
Loading...
