What to do if my Belling IH6013 won’t turn on?
If your Belling hob isn't working and the indicators are off, it indicates that the electricity supply isn't reaching the appliance due to a faulty supply or connection. Check the fuses and the cut-out switch to restore power.
Why does my Belling IH6013 Hob show |U|?
The |U| indicator on your Belling hob means that there is no pan or the pan is not suitable for the cook zone. To resolve this, ensure you are using the correct pan size and that the pan is suitable for induction use. You can check the pan's suitability with a magnet.
Why does the fan keep running on my Belling IH6013 Hob after I turn it off?
The cooling fans are designed to operate on your Belling hob while the appliance is on and continue until it has sufficiently cooled down. This is normal.
What to do if my Belling IH6013 shows a Heater Error?
If your Belling hob displays a Heater Error, switch the power off and then on again. This should reset the system.
What to do if the Belling Hob total power requested reaches 2.8 kW?
If the total power requested reaches 2.8 kW on your Belling Hob, it will be signalled by a letter 'r' in the zone window for 3 seconds, accompanied by an audible 'Beep'. To use additional zones, you'll need to reduce the power setting of one of the currently active cooking zones.
Why do my pans make noise when cooking on my Belling IH6013?
The noise from your pans during cooking on your Belling hob is caused by vibration due to the energy transferring from the hob to the pan. This is normal for certain types of saucepans on a high setting and will not damage the hob.
What does |C/P| mean on my Belling IH6013 display?
The |C/P| indicator on your Belling hob means the heater is over temperature, indicating the pan is overheating. Allow the hob to cool.
What does |H/C| mean on my Belling Hob?
The |H/c| indicator on your Belling hob means the induction generator is over temperature. Check the installation and ensure free airflow to the hob.
How to get rid of the new smell from my Belling IH6013?
To eliminate the smell produced by your Belling hob when it's first used, heat a pan full of water on each zone for half an hour.
Why is my Belling IH6013 Hob making a clicking sound?
This clicking sound from your Belling hob is caused by the distribution of power between two heating zones on the same side of the hob.
To Next Page
General
