Belling IH6013 - Using the Hob

USING THE HOB
Central On/Off switch
The central on/off switch enables all of
the cooking zones to be switched off
simultaneously at a touch of a key.
To switch on the hob
The hob is switched On by touching
the“ON/OFF” key for 1 sec.
A beep sounds and all the heater displays
show a full stop in the cook zone display.
If the selection of a heater is not done in
10 seconds, the hob will turn off auto-
matically.
The hob is switched Off by touching
the“ON/OFF” key for 1 sec.
A beep sounds and all the heaters are
switched Off.
Switching on an individual hob cook
zone
To switch on a cook zone it is necessary
to actuate every cooking zone by means
of two operations:
1) Touch the required cook zone key for
approx 1s a beep sounds and the heater
display shows the power level with normal
brightness.
The heaters that are not selected are
dimmed. When the cook zone selec-
tionisnishedafter10seconds,abeep
sounds and all the heater displays that
were dimmed show the power levels with
normal brightness.
2) Select the required power setting using
the up +/down – keys.
Switching off an individual hob cook
zone
Once the cook zone is selected, it can be
switched off by touching the down [-]
and up [+] keys simultaneously. A beep
sounds and the corresponding display-
shows “0”.
Power Boost
Temporarily boost the power to a cook
zone by approx 25%, all areas can be
boosted for a period of up to 10 minutes,
After 10 minutes a beep sounds and the
heater will return to level “9”.
Quick Operation
With the cook zone at power level 0,
touch the down [-] key the power level
will raise straight to 9.
With the cook zone at power level 9,
touch the up [+] key the power level will
raise to the Power Boost level and a beep
sounds and the heater display shows “P”.
Pan Detection
As soon as you lift the pan off the zone
the power is automatically reduced, help-
ing to save energy.
The above “U” symbol appears when a
zone has been activated but no pan has
been placed on the cook zone,
If the “U” symbol does not disappear
when a pan is placed on the zone it
indicates that the pan is not suitable for
induction cooking.
Note
This means the hob only uses power
when a suitable pan is placed on the
zone, this reduces the energy used during
the cooking process, i.e. when you take
your pan off the zone the hob automati-
cally reduces the power, and only switches
back on when you replace the pan.