EasyManua.ls Logo

Belling E641 - Hob Care and Discolouration Prevention

Belling E641
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Painted, plastic and metal finish
parts
OVEN DOOR FRAMES
&
HANDLES
,
GRILL PAN
HANDLE
,
FACIA PANEL
&
CONTROL KNOBS
Only use a clean cloth wrung out in
hot soapy water.
Glass parts
GLASS DOOR PANELS
.
Do not use abrasives or polishes as
they will scratch and damage the glass.
Use a mild cream cleaner - eg; “Cif”.
Rinse away excess cleaner and dry
with a soft cloth.
The oven door inner glass panel
can be removed for cleaning by
grasping the top and bottom edges
and sliding out. When refitting, take
care that the glass is held level and
straight with the grooves in the door,
before sliding back in.
W a r n i n g : Do not operate the appliance
without the glass panel correctly fitted.
I m p o r t a n t : the inner door glass
panel can be removed for cleaning but
it must be replaced the right way up
(so the reflective side - if fitted - faces
inwards), and pushed fully in to the
stop position. To remove the glass
panel, open the door wide, hold the
top and bottom edges and slide out.
Chrome plated parts
OVEN SHELVES
&
OVEN SHELF RUNNERS
,
GRILL PAN TRIVET
Do not use abrasives or polishes, use
a moist soap pad - eg; “Brillo”.
N o t e : Oven shelf runners can be
removed for cleaning. Grasp the
runners, and slide out of the hanging
holes as shown.
Note: These items may also be
cleaned in a dishwasher.
Ceramic glass hotplate
Do not use abrasive powder cleaners,
“Brillo” pads, metal wire, detergents,
bleaches, bath stain removers, or
chemical oven cleaners; all these prod-
uct types will damage the ceramic
glass.
The following recommendations will
help to keep the ceramic glass surface
bright and clean.
21
Cleaning
Pull out to clean
08 27156 01- E641-E622 11/5/07 12:38 pm Page 22

Related product manuals