Belling FSDF61DOWS - Fully Automatic Cooking Example

11.100
FULLY AUTOMATIC COOKING (EX-
AMPLE)
This programming method is best suited
forwhenadelayedstarttimeisrequired.
Unlike the semi automatic methods this
requiresboththedurationandtheend
time to be entered. The timer will work
out the start time and begin cooking.
• Press the function button twice to
select the length of time your food
will need. (7)
• The‘A’onthelefthandsidewillash
andthe‘dur’messagewillashup.
(8)
• Using the Up and Down buttons set
thetimeyourequirewithin5seconds
of the ‘dur’ message. (9)
• Press the function button three times
untilthe‘A’ashesagainandthe
‘End’ messages appears. (10) & (11)
• Using the Up and Down buttons, set
the time you would like the oven to
switch off. (12)
• Set the temperature of the oven and
place the food inside.
While the automatic function is running,
the ‘A’ will appear statically on the display,
with the time.
Try to keep the end time as close to when
you expect to return, this will prevent
cooked food from being left standing in a
warm oven.
The timer will calculate the appropriate
start time.
To switch off the alarm, press any button.
USING THE CLOCK/PROGRAMMER-ELEC(
if fitted
)