Positioning theAppliance
How to Drain Excess Water From Hoses
If the s ink is 100 0 h igher from t he floor, the exces s w ater i n ho ses cannot b e dr ained di rectl y
into the sink. It will b enecessary to d rain excess water from hoses into a bowl or suitable
conta iner that is he ld outside and lower than the sink.
The following things should be checked before starting the dishwasher.
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
Extension Hose
If y ou n eed a dr ain h ose extensi on, m ake sur e to use a simila r dra in ho se.
It m ust be no lo nger t han 4 m etres; o therwise the cleanin g eff ect o f the di shwashe r coul db e re duce d.
1 The dishwasher is level and fixed properly
2 The inlet valve is open
3 There is a leakage at the connections of the conducts
4 The wires are tightly connected
5 The power is switched on
6 The inlet and drain hoses are knotted
7 All packing materials and printings should be taken out from the dishwasher
Connect the cold water supply h os e to a t hreaded 3/4(inch) connector and make
sure that it i s fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time,
let the water runto make sure that the w ater is clear. This precaution is needed
to avoid the risk of the water inle t tobe blocked and damage t he appliance.
Positi on the app liance in the desired location. The bac k should rest ag ainst the wall behind i t, a nd t he sid es,
along t he adjacent c abin ets or wa lls. The dish washer i s equipped w ith water supply and drai nh oses that can
be positioned either to the right or the left sides to facilitate pro per installation.
Water Outlet
Connect the water drain hose. The drain hosemust be correctly fitted toavoid water leaks.
En sure that the wat er dr ain hose is n ot kinke d or squa she d.
Syphon Connection
The was te c onnecti on must be at a h eight of betw een 40 c m ( minimum ) an d 1 00 cm (maxim um)
fromthebottom of thedish. The water drain hose should be fixed bya hoseclip.The freeendof
the hose m ust n ot be im mersed in w ater.
Please close the h ydrant a fter us ing.
To Next Page
Loading...