Troubleshooting
Before you call Customer Care, please
check the following points:
Burner fails to ignite:
• Check the electricity supply is on.
• Check the fuse.
There is a spark to the burner
but it fails to ignite:
• Check that the ame holes in the
ame spreader are clear of water
or deposits.
• Check that the gas supply is turned
on.
Smell of gas:
• Check that none of the controls
have inadvertently been turned
on. If all the controls are in the off
position, turn off the gas supply &
call Customer Care.
The burner ame appears
uneven:
• Check the burner is tted correctly.
• Check the ame holes in the ame
spreader are clear of water or
deposits.
19
To Next Page
Loading...
