EasyManua.ls Logo

Bellini BC604T - Maintenance and Troubleshooting; Cleaning the Vitro-ceramic Surface; Avoiding Appliance Damage; Troubleshooting Common Issues

Bellini BC604T
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Maintenance & Troubleshooting
Caution:
z Spills and splashes will not harden and stick to the glass, as it hardly heats up.
z Vitro-ceramic should however be cleaned of any spills or splashes as quickly as possible.
z Slight stains can be removed with kitchen paper or cloth.
z More resistant stains will need specific product for vitro-ceramic glass. Follow each product’s inductions.
Important:
z Do not use abrasive products or cleaning powders as these could scratch the cooktop.
z Do not use a steam cleaner.
z If any cracks should appear on the surface of the glass, unplug the appliance immediately.
z Do not use any part of the cooktop until a new vitro-ceramic glass has been installed.
Problem Possible Causes What Shall I do
Heating progress sounds halt Internal thermostat is working to
avoid over heat.
Wait for a while, it restarts automatically.
The cooktop continues to
ventilate for several minutes
after switching off.
The electronic circuits are cooling
down.
This is normal.

Related product manuals