11
The power level and time corresponding tables of Fast-heating are as below:
Power Level 1 2 3 4 5 6 7 8 9
Fast-heating
time（minute）
1 3 4.8 6.5 8.5 2.5 3.5 4.5 5
For example, press “plus button” to achieve “A”, and press “minus button” to select
speed 4. The cooktop will start cooking at speed 9 for 6.5 mins. After then it returns
back to the set speed 4.
Notice:
1.Only if fast-heating at max power within 30s,press minus button can reduce the
power,if press minus button after 30s,it will exit the fast-heating mode.
2. If fast-heating at max power after 30s,as long as it is still alternately display “A” and
“9”, press plus button the hob will stay at auto-heating mode.
3. When changing power level,the passed time will be automatically calculated into the
corresponding heating time of the new power level.
4. Within 30s fast-heating time,if press minus button to any level,the passed time will
be calculated to the new set level time,after heating at that remaining time,the hob will
return to normal heating mode.
Setting a countdown time
Your hob has a timer which will countdown a period of time between 1 and 99 minutes.
If timer display shows 0 for the initial status,press minus button,countdown period will
be 30 to 0.At the end of the countdown period an audible signal will sound for 2
minutes, press any key within 2 minutes can close the audible signal.
Press the timer button,use the plus button and minus button to set the countdown
time,first pressing “+” button,timer will begin from 1.
If you want to cancel the timer,you can adjust the countdown time to 0.
The timer display will show the countdown time that is being set.
The timer display will increase in 1 minute intervals each time the timer plus button
is pressed,and a short audible signal will be heard.
The timer display will decrease in 1 minute intervals each time the timer minus
button is pressed,and a short audible signal will be heard.
When the set time exceeds 99 minutes, it needs to press the minus button(5) and
decrease the time back to 0 ,then can repeat above operation.
Note: 1. For timer adjustment,touch timer button and use plus button or minus
button to input new time.
2. After selecting the burner,you can set the timer before setting the power
level of the burner,within 10S(decimal point of corresponding digital tube will
flash,1 time/S) no operation after timer adjustment,timer will automatically return
to 0(display show 00),and decimal point will extinguish.
3. After the burner is working,durning timer setting and completed, indicator
of corresponding burner will flash(1 time/S),and it will keep flashing until end of
the timer.
IMPORTANT: The countdown timer controls the entire hob,as well as an
individual cooking zone. When this function is used, the hob will switch off
entering stand-by mode.
To Next Page
Loading...
