Replacement of the Oven Light Bulb
In order to avoid the possibility of an
electric shock, ensure that the appliance
is switched off and disconnected from the
mains power supply before replacing the bulb.
• Set all control knobs to the position “0”.
• Unscrew and wash the lamp cover and then
• Unscrew the light bulb from the socket, replace
the bulb with a new one – a high temperature
bulb(300°C) with the following parameters:
• Screw the bulb in, making sure it is properly
inserted into the ceramic socket.
• Screw in the lamp cover.
In the event of an emergency, you should:
• Switch off all working units of the oven.
ome minor faults can be fi xed by referring to
the instructions given in the table below.
Before calling the customer support centre or
the service centre check the following points
that are presented in the table.
To Next Page
Loading...
