Need help?Do you have a question about the Belmed PC-7 and is the answer not in the manual?
General| Brand | Belmed |
|---|---|
| Model | PC-7 |
| Category | Measuring Instruments |
| Language | English |
General safety warnings, important cautions, and health/regulatory information regarding NIOSH and ADA recommendations.
Describes the N2O/O2 flowmeter tubes, flow control valves, ON/OFF control, and oxygen flush function.
Details the oxygen fail-safe, air intake valve, and non-rebreathing check valve for patient safety.
Covers the oxygen resuscitator quick connect and the solid block design for leak prevention.
Covers initial unit testing, minimum oxygen flow, oxygen flush, and maximum nitrous oxide flow tests.
Procedures for testing the fail-safe mechanism and breathing circuit components like air intake and non-rebreathing valves.
Step-by-step instructions for administering conscious sedation using the flowmeter.
Guidelines for daily inspection of hoses, functional testing, and proper cleaning of the unit.
Instructions for assembling the mobile stand and attaching the flowmeter to the yoke block.
Details for connecting the breathing circuit, bag, and gas supply hoses to the flowmeter.
Specific steps for securing the flowmeter to the yoke block assembly using provided screws.
Connecting the breathing bag, corrugated tube, and nasal inhaler to the yoke assembly.
Instructions for securely mounting the wall arm or cabinet bracket to a suitable support.
Details on attaching the flowmeter to the bracket and connecting rubber goods and supply hoses.
Guidance on mounting the arm using either dry wall expanders or stud mounting.
Operational details for releasing and stowing the flowmeter using the cabinet bracket.
Specifications for the short mobile stand, including height, width, and adjustment range.
Specifications for the tall mobile stand, including height, width, and adjustment range.
To Next Page