Belva BMV62W - User Manual

Questions and Answers

D
davisadamAug 20, 2025
Why is there no sound coming from my Belva BMV62W, or why is the sound very low?
- W
  William RochaAug 20, 2025
  If you are experiencing low or no sound from your Belva Car Receiver, there are a couple of potential causes: * The volume of the unit and/or connected device is very low. Solution: Increase the volume of the unit and connected device. * The position of the fader control is not set for a 2-speaker system. Solution: Increase the volume of the unit and connected device.
B
belljayAug 22, 2025
What to do if my Belva BMV62W Car Receiver head unit won’t power on?
- J
  James BowmanAug 22, 2025
  If your Belva Car Receiver head unit won’t power on, the cause may be short-circuiting between the wires. To resolve this, replace the old fuse with one of appropriate capacity.
L
leejonathanAug 25, 2025
How to fix my Belva Car Receiver when it cannot receive stations and the sound is hampered by noises?
- M
  Michael RodriguezAug 25, 2025
  If your Belva Car Receiver cannot receive stations and the sound is hampered by noises, here are a couple of things to check: * Check the connection of the car antenna (aerial). * If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead.
C
Clinton GarzaAug 26, 2025
How to reduce echo or noise during phone calls with my Belva BMV62W Car Receiver?
- N
  nicole64Aug 26, 2025
  If you are experiencing echo or noise during phone call conversations using your Belva Car Receiver, try the following: * Lower the volume. * If the ambient noise other than the phone call sound is loud, try reducing this noise. For example, if a window is open and road noise, etc., is loud, shut the window. If an air conditioner is loud, lower the air conditioner.
M
mejiaemmaAug 28, 2025
What to do if buttons on my Belva Car Receiver are not functioning properly?
- N
  Nancy BishopAug 28, 2025
  If the buttons on your Belva Car Receiver are not functioning properly, press the reset button on the panel. If it still does not work, unplug the power and plug it in again after a while.
J
John NortonAug 29, 2025
Why is the display/illumination flashing on my Belva Car Receiver?
- M
  Maria WattsAug 30, 2025
  If the display/illumination is flashing on your Belva Car Receiver, the power supply may not be sufficient. Check that the car battery supplies enough power to the unit. The power requirement is 12 V DC.
K
Kevin ThomasSep 1, 2025
Why is the volume low when using a connected audio device with my Belva Car Receiver?
- D
  dawsoncristinaSep 1, 2025
  If the volume of the connected audio device is low when using your Belva Car Receiver, adjust the volume of the connected audio device or this unit, as the volume level will differ depending on the audio device.
T
Thomas KlineSep 2, 2025
What to do if Bluetooth function cannot operate on my Belva BMV62W?
- J
  James HardySep 2, 2025
  If the Bluetooth function cannot operate on your Belva Car Receiver, turn off the unit by pressing (Power) for more than 2 seconds, then turn the unit on again.
J
John HammondSep 4, 2025
Why is the phone sound quality poor with my Belva Car Receiver?
- S
  Selena MartinezSep 4, 2025
  If the phone sound quality is poor when using your Belva Car Receiver, move your car to a place where you can enhance the cellular phone’s signal if the reception is poor, because phone sound quality depends on the reception conditions of the cellular phone.
C
Chad GonzalezSep 6, 2025
How to adjust the call volume if a call partner says it's too low or high on my Belva Car Receiver?
- A
  alyssacarterSep 6, 2025
  If a call partner says that the volume is too low or high when using your Belva Car Receiver, adjust the volume accordingly using Mic gain adjustment.

Summary

Installation Guide

Wiring Diagram Overview

Illustrates connection points for speakers and power using ISO connectors.

Radio Operation

Station Tuning and Management

Main Interface Overview

Application Access Points

Bluetooth Functionality

Bluetooth Pairing and Connection

Guides on pairing mobile devices and troubleshooting connection issues.

Bluetooth Calling Features

Accesses calling interface, dialing, and managing call logs.

Bluetooth Functionality (Continued)

Phonebook and Contact Management

Bluetooth Music Playback

Mirrorlink Functionality

Wired Android Mirrorlink Setup

Connects Android phones via USB for screen mirroring.

Mirrorlink Functionality (Continued)

Wireless Android Mirrorlink Setup

Connects Android phones wirelessly for screen mirroring.

Wireless iOS Mirroring Setup

Connects iOS devices wirelessly for screen mirroring.

Wired iOS Mirroring Setup

Connects iOS devices via USB cable for screen mirroring.

System Settings Configuration

System Configuration Options

System Settings (Continued)

Audio Tuning and Equalizer

Steering Wheel Control Configuration

Troubleshooting Common Issues

General Operational Problems

Addresses common issues like no sound, low volume, or power failures.

Radio Performance Problems

Fixes for radio reception issues, noise, and preset tuning failures.

Troubleshooting (Continued)

USB Device Connectivity Issues

Solutions for USB playback errors, slow loading, and hub recognition.

Bluetooth Audio Playback Issues

Fixes for audio skipping, unresponsiveness, and function failures.

Bluetooth Connectivity Problems

Troubleshoots Bluetooth pairing, connection, device names, and audio quality.

Hands-Free Call Audio Problems

Troubleshoots no sound output from car speakers during hands-free calls.

Call Quality and Volume Adjustments

Fixes for poor call quality, echo, noise, and volume level issues.

Belva BMV62W Specifications

General

Display Size	6.2 inches
Display Type	LCD
Touchscreen	Yes
Resolution	800 x 480
DIN Size	Double DIN
Bluetooth	Yes
USB Port	Yes
SD Card Slot	Yes
AUX Input	Yes
Audio Formats Supported	MP3, WMA
Peak Power Output	50 watts x 4 channels
Equalizer	Yes
Rear Camera Input	Yes
Steering Wheel Control	Yes
Subwoofer Output	Yes
AM/FM Radio	Yes
GPS Navigation	No
Video Formats Supported	MP4, AVI
Power Output	4 x 50W
Preamp Outputs	3 pairs (Front, Rear, Sub)
Type	Car Receiver

Related product manuals