What to do if water is not spraying out of my BEMIS toilet?
If water isn't spraying out of your BEMIS toilet, first check if the shutoff valve is closed and open it. Ensure that your skin is in contact with the seat sensor. Finally, make sure the hose isn't crimped; if it is, reposition it.
Why is the seat on my BEMIS toilet not warm?
If the seat on your BEMIS toilet isn't warm, adjust the seat temperature using the +/- buttons on the remote control. If power saving mode is on, the seat is kept at a lower temperature until activated.
Why can’t I flush my BEMIS toilet with the remote control?
If you can't flush your BEMIS toilet with the remote control, replace the old batteries with new ones. Also, remember that this function cannot be used consecutively; wait about 10 seconds between flushes. Lastly, ensure the transmitter or receiver is clean by wiping the affected areas.
Why is the water cold in my BEMIS toilet?
If the water from your BEMIS toilet is cold, adjust the temperature using the +/- buttons on the remote control. If power saving mode is turned on, the water temperature is set lower and increases when seated.
What to do if BEMIS toilet is not flushing sufficiently?
If your BEMIS toilet is not flushing sufficiently, ensure the shutoff valve is open enough. If there's debris in the hose, turn off the water shutoff valve and clean out the hose.
How to fix auto flushing on BEMIS bioBidet PRODIGY P500?
If the auto flushing feature on your BEMIS toilet isn't working, press the auto flushing button on the remote control again to turn it on. When off, the flushing indication on the remote control display panel is off.
How to adjust dryer temperature on BEMIS toilet?
If the dryer temperature on your BEMIS toilet is too low, adjust the air temperature with the +/- buttons on the remote control.
Why is there no water for flushing my BEMIS toilet?
If there is no water for flushing your BEMIS toilet, ensure the water shutoff valve is sufficiently open. Wait until the water supply is resumed if it was suspended.
Why does the BEMIS toilet posterior wash work without sitting?
If the posterior wash or deodorant function on your BEMIS toilet activates without anyone sitting on the seat, check if the seat sensor is blocked by a wet towel and remove it. If the seat sensor is wet, wipe it with a dry cloth.
Why does the water stop mid-cleanse on my BEMIS toilet?
If the water stops in the middle of cleansing with your BEMIS toilet, press a cleansing function button again, as the cleaning functions automatically stop after five minutes of use. Ensure skin contact with the seat sensor.
General| Brand | BEMIS |
|---|---|
| Model | PRODIGY P500 |
| Type | Bidet Toilet Seat |
| Bowl Shape | Elongated |
| Material | Plastic |
| Color | White |
| Water Temperature Control | Yes |
| Water Pressure Control | Yes |
| Heated Seat | Yes |
| Dryer | Yes |
| Remote Control | Yes |
| Energy Saving Mode | Yes |
| Deodorizer | Yes |
| Night Light | Yes |
| Nozzle Positions | Adjustable |
| Nozzle Self-Cleaning | Yes |
| Power Source | Electric |
| Voltage | 120V |
| Water Heating | Tankless |
| Temperature Settings | 3 levels |
| Warranty | 3 years |
To Next Page