What to do if water is not spraying out of my BEMIS toilet?
If water isn't spraying out of your BEMIS toilet, first check if the shutoff valve is closed and open it. Ensure that your skin is in contact with the seat sensor. Finally, make sure the hose isn't crimped; if it is, reposition it.
Why is the seat on my BEMIS toilet not warm?
If the seat on your BEMIS toilet isn't warm, adjust the seat temperature using the +/- buttons on the remote control. If power saving mode is on, the seat is kept at a lower temperature until activated.
Why can’t I flush my BEMIS toilet with the remote control?
If you can't flush your BEMIS toilet with the remote control, replace the old batteries with new ones. Also, remember that this function cannot be used consecutively; wait about 10 seconds between flushes. Lastly, ensure the transmitter or receiver is clean by wiping the affected areas.
Why is the water cold in my BEMIS toilet?
If the water from your BEMIS toilet is cold, adjust the temperature using the +/- buttons on the remote control. If power saving mode is turned on, the water temperature is set lower and increases when seated.
What to do if BEMIS toilet is not flushing sufficiently?
If your BEMIS toilet is not flushing sufficiently, ensure the shutoff valve is open enough. If there's debris in the hose, turn off the water shutoff valve and clean out the hose.
How to fix auto flushing on BEMIS bioBidet Prodigy P700?
If the auto flushing feature on your BEMIS toilet isn't working, press the auto flushing button on the remote control again to turn it on. When off, the flushing indication on the remote control display panel is off.
How to adjust dryer temperature on BEMIS toilet?
If the dryer temperature on your BEMIS toilet is too low, adjust the air temperature with the +/- buttons on the remote control.
Why is there no water for flushing my BEMIS toilet?
If there is no water for flushing your BEMIS toilet, ensure the water shutoff valve is sufficiently open. Wait until the water supply is resumed if it was suspended.
Why does the BEMIS toilet posterior wash work without sitting?
If the posterior wash or deodorant function on your BEMIS toilet activates without anyone sitting on the seat, check if the seat sensor is blocked by a wet towel and remove it. If the seat sensor is wet, wipe it with a dry cloth.
Why does the water stop mid-cleanse on my BEMIS toilet?
If the water stops in the middle of cleansing with your BEMIS toilet, press a cleansing function button again, as the cleaning functions automatically stop after five minutes of use. Ensure skin contact with the seat sensor.
Safety precautions to avoid electrocution risks during product use.
Essential warnings to prevent burns, fire hazards, and personal injury.
Proper grounding procedures to ensure electrical safety.
Actions not recommended that can cause malfunctions or safety risks.
Situations that require immediate shutdown and unplugging of the unit.
Core functions like posterior wash, feminine wash, enema, and drying.
Features enhancing user comfort, including deodorizer and auto functions.
Integrated safety features and hygiene-related functions.
Features designed to conserve energy during operation or standby.
Visual guide to the main body, remote control, and their parts.
Detailed operation of buttons and controls on the remote transmitter.
Operation of advanced features like auto lid and auto flush for P770.
Step-by-step instructions for inserting batteries into the remote.
Guidelines for proper battery handling to prevent damage.
Verifying the power plug is securely connected to the unit.
How to regulate water pressure using the shutoff valve.
Checking the operation and seat indicator lights on the unit.
How the seat sensor activates functions and initial usage.
Operating posterior wash, feminine wash, enema, and dry features.
Procedures for stopping current operations and flushing.
Utilizing oscillating, pulsating, and rhythm cleansing options.
Modifying seat, water, and dryer temperatures via remote.
Understanding the display lights for active temperature settings.
Adjusting water flow and nozzle placement for comfort.
Steps to clean the bidet nozzle using the dedicated function.
Activating and managing deodorizer and power saving functions.
Using the remote control for opening and closing the seat and lid.
How the lid and seat automatically open/close based on user presence.
Using remote, auto, or manual flush options.
Instructions for operating the bowl cleaning feature.
Procedures for routine and deep cleaning of the bidet unit.
Steps for removing, cleaning, and re-securing the deodorizer filter.
Solutions for units not working or display panel errors.
Addressing issues like no spray, low pressure, or cold water.
Resolving stops during use or issues with seat sensor activation.
Diagnosing problems with seat sensor and auto flushing functions.
Troubleshooting remote control not working or flushing failures.
Solutions for the heated seat not providing warmth.
Resolving problems with the deodorizer or dryer functions.
Troubleshooting power saving mode and insufficient flushing.
Detailed technical data, dimensions, and power consumption.
Information on responsible product disposal and recycling.
Details on warranty coverage, duration, and what is not covered.
Procedures and required information for warranty claims.
This document is the owner's manual for the Prodigy smart toilet, available in two models: P700 and P770. It provides comprehensive information on product features, operation, maintenance, troubleshooting, and warranty.
The Prodigy smart toilet offers a range of standard and comfort functions designed for personal hygiene and convenience.
The Prodigy smart toilet is available in two models, P700 and P770, with slight differences in weight and lid operation.
The manual outlines detailed steps for preparing the unit for use and operating its various functions.
The manual provides clear instructions for regular and specific maintenance tasks.
To Next Page
General