BEMIS bioBidet SLIM ONE

Questions and Answers

M
Mr. Robert ChenAug 5, 2025
What to do if water does not spray out of BEMIS Toilets?
- A
  Angela HahnAug 5, 2025
  If the water isn't spraying out of your BEMIS toilet, here are a few things to inspect: * Make sure the water supply is turned on. * Verify the water valve is completely open. * Check the nozzle for any blockage from foreign materials. * Ensure the connection hose isn't bent, which could restrict water flow.
L
linda22Aug 11, 2025
How to troubleshoot BEMIS bioBidet SLIM ONE when completely out of order?
- D
  David DickersonAug 11, 2025
  If your BEMIS toilet is completely out of order, you can try the following: * Check that the power plug is properly connected. * Make sure that the power supply or outlet is working correctly.
H
hardinrobertAug 17, 2025
Why is the water pressure low in my BEMIS bioBidet SLIM ONE?
- E
  Eric SanchezAug 17, 2025
  If you're experiencing low water pressure with your BEMIS toilet, here's what you can check: * See if the screen filter is blocked; clean it if necessary. * Confirm that the water pressure isn't set too low.
F
francisco65Aug 23, 2025
What to do if water is not warm enough in BEMIS bioBidet SLIM ONE?
- W
  William GonzalezAug 23, 2025
  If the water isn't warm enough in your BEMIS toilet, check if the temperature is set to off, a low level, or economy mode.
J
Jeffrey DeckerAug 29, 2025
Why is the seat not warm enough on my BEMIS Toilets?
- N
  Nicholas ThomasAug 29, 2025
  If the seat on your BEMIS toilet isn't warm enough, make sure the temperature isn't set to off, a low level, or economy mode.

Summary

Safety Precautions

Grounding Instructions

Details the importance of proper grounding and its risks if misused for electrical safety.

Optional Grounding Instructions

Provides guidance on using temporary adapters for grounding when a properly grounded outlet is unavailable.

Parts List

Product Overview

Dimensions and Remote Control

Remote Control Functions

Explains the operation of various buttons and features on the remote control unit.

Installation Guide

How to Use

Basic Operation and Functions

Covers sitting on the seat sensor and using Wash, Bidet, Turbo, and Pulse functions.

Advanced Usage Features

Details Nozzle Position, Water Pressure, Stop, Seat Temperature, Energy Saving, and Night Light controls.

Specialized Functions

Explains Sitz Bath, Seat Sensor Bypass, Reset, and Inline Carbon Filter usage.

Maintenance and Cleaning

Cleaning Procedures

Guides on cleaning the screen filter, unit exterior, and draining remaining water.

Extended Non-Use Procedure

Instructions for unplugging and draining the unit during periods of extended non-use.

Settings and Troubleshooting

User Settings

Details user settings controllable via the remote, such as silent mode and night light.

Troubleshooting Common Issues

Provides a checklist for common problems like no water spray or low pressure.

Specifications and Warranty

Product Specifications

Lists technical details including voltage, power consumption, dimensions, and water flow rates.

Warranty Information

Outlines the one-year limited warranty details and customer support contact information.

This document is the owner's manual for the Bio Bidet Slim One, a smart toilet seat designed to enhance hygiene and comfort.

Function Description

The Bio Bidet Slim One is a smart bidet toilet seat that offers a range of features for personal cleansing and comfort. Its primary functions include:

Wash Function: Provides a posterior wash with adjustable water pressure and nozzle position.
Bidet Function: Offers a feminine wash, also with adjustable water pressure and nozzle position.
Turbo Function: A specialized water spray designed to help relieve constipation.
Pulse Function: Delivers a pulsating wash during wash, bidet, or turbo operations by alternating water pressure between high and low.
Child Function: Adjusts settings to low pressure for children, including a 1-minute bidet, 30-second bidet oscillating, and 30-second bidet pulse, along with extended nozzle position, lower water pressure, lower seat temperature, and lower water temperature.
Heated Seat: Provides a warm seat with adjustable temperature settings (Off, Low, Middle, High).
Warm Water Wash: Delivers warm water for washing, with adjustable water temperature settings (Off, Low, Middle, High).
Dryer: A warm air dryer for post-wash drying.
Night Light: A blue LED night light provides enough brightness to see the toilet without turning on the bathroom light.
Nozzle Cleaning: Automatically cleans the nozzle three times when activated while not seated. The nozzle extends for manual cleaning.
Energy Saving Modes: Two ECO modes (ECO 1 and ECO 2) to save energy by maintaining seat and water temperatures at 32°C (ECO 1) or turning off heating elements (ECO 2).
Sitz Bath: Switches to a Sitz Bath mode during wash or bidet, providing 5 minutes of operation with water pressure set to the first level.
Seat Sensor Bypass: Allows the unit to operate without a user being seated, though some features like night light, silent mode, and nozzle cleaning may not be controllable in this mode.
Factory Reset: Resets the unit to its factory settings.

Important Technical Specifications

Rated Voltage: 120V, 60Hz
Max. Power Consumption: 870W
Power Cord Length: 1.2 m
Water Feed Method: Directly connects to water pipe
Recommended Inlet Water Pressure: 99-106.6 psi
Wash Feed Volume:
- Wash: 0.13-0.21 gal/min
- Bidet: 0.13-0.18 gal/min
- Turbo: 0.13-0.18 gal/min
- Child: 0.13-0.16 gal/min
Pressure Control: 5 levels
Wash Temperature Control: 4 levels (off-low-middle-high)
Wash Heater Capacity: 800W
Wash Safety Device: Water level sensor, Thermal fuse, Bi-metal, Temperature sensor
Heated Seat Temperature Control: 4 levels (off-low-middle-high)
Heated Seat Heater Capacity: 55W
Heated Seat Safety Device: Thermal fuse
Feed Water Temperature Tolerance Range: 37-95°F (recommended 54-95°F)
Usage Room Temperature Tolerance Range: 37-104°F (recommended 54-95°F)
Dimensions (Elongated): 18.5" (470) x 20.8" (528) x 6.8" (173)
Weight (Elongated):
- Net Weight: 10.4 lb
- Gross Weight: 15.2 lb
Grounding: Three-prong grounding plug for a 120V circuit. A temporary adapter can be used if a grounded outlet is not available, but a properly grounded outlet is recommended.

Usage Features

Remote Control: All functions are controlled via a remote control, allowing for easy adjustment of settings.
Occupied Sensor: The unit will only operate when a user is seated, ensuring safety and preventing accidental activation.
Adjustable Nozzle Position: The nozzle position can be adjusted to 5 different levels for personalized cleansing.
Adjustable Water Pressure: Water pressure for wash, bidet, and turbo functions can be adjusted to 5 levels.
Adjustable Seat Temperature: The heated seat has 4 temperature settings (Off, Low, Middle, High). A safety feature reduces the seat temperature to low (35°C, 95°F) if occupied for more than 15 consecutive minutes to prevent low-temperature burns.
Adjustable Water Temperature: The wash water temperature has 4 settings (Off, Low, Middle, High).
Silent Mode: Allows users to turn on/off the operating chime sound.
Automatic Tank Draining: The manual provides instructions for draining remaining water for extended non-use.
GFCI Outlet Requirement: For safety, the power supply must be a 15 Amp GFCI outlet, located at least 1 ft above the floor.
Ventilation: Requires installation in well-ventilated areas to avoid excess humidity.
Inline Carbon Filter: Use of an external water filter is recommended for areas with hard water issues. Filters should be replaced every 3 months. Only Bio Bidet DIB water filters are recommended; using other filters voids the warranty.

Maintenance Features

Screen Filter Cleaning: Instructions are provided for closing the water valve, disconnecting the water supply hose, removing and cleaning the screen filter with a soft brush, and then reassembling. Regular checking of water and screen filters is recommended to prevent low water pressure.
Extended Non-Use: For periods of extended non-use, it is recommended to unplug and drain the unit.
Unit Cleaning: The exterior surface, made of plastic, should be wiped with a soft damp cloth. Avoid using scrubbers, chemicals, or spraying water directly onto the surface. The power plug should be removed before cleaning the body, and care should be taken to prevent water splashes into the power plug or outlet. Chemical detergents or toilet cleaner should not be dropped on the main body or supply hose.
Draining Remaining Water: Detailed steps are provided for removing the power plug, closing the water feed valve, removing the unit from the catch plate, and using a flat-head screwdriver to open the drain plug.
Nozzle Cleaning: The nozzle has an automatic self-cleaning function. Manual cleaning with a brush is also possible after the automatic cleaning cycle.