BEMIS bioBidet DISCVOERY DLS - User Manual

USER MANUAL DISCVOERY DLS
v3.0

Summary

Important Safeguards

General Safety Precautions

Essential safety guidelines and precautions for using the bidet seat to prevent hazards.

General Cautions

Usage and Environmental Precautions

Guidelines for safe operation, environmental conditions, and preventing damage during use and storage.

Overview and Parts

Product Components Identification

Detailed identification of the Discovery DLS bidet seat and its included parts for user reference.

Remote Control

Remote Control Functions and Pairing

Explanation of remote control buttons, functions, and the process for pairing it with the bidet seat.

Operation

Basic Operation and Preparation

Steps for preparing the bidet seat, turning it on, and using basic wash and open/close functions.

Advanced Features and Settings

Detailed explanation of advanced features like dynamic stream, night light, temperature adjustments, and UV sterilization.

Installation Guide

Pre-Installation Caution

Important warnings and recommendations before beginning the installation process.

Step-by-Step Installation

Instructions for turning off water, removing the old seat, installing the catch plate, and attaching the bidet.

Connecting Water and Power

Guide for connecting the water hose, plugging in the power, and mounting the remote control.

Maintenance

Removing the Discovery DLS

Procedure for safely disconnecting the bidet seat from the toilet.

Cleaning Instructions

Guidelines on how to clean the bidet seat using appropriate methods and avoiding damage.

Extended Travel Preparation

Recommendations for preparing the bidet seat when it will not be used for an extended period.

Specifications

Product Technical Specifications

Detailed technical data for the Discovery DLS, including voltage, power, dimensions, and temperature ranges.

Warranty

5 Year Premier Warranty Coverage

Information regarding the 5-year warranty, including coverage, limitations, and claim procedures.

Warranty Limitations and Exclusions

Details on what is not covered by the warranty, such as damage from misuse or improper installation.

Important Warning on Water Treatment

Warning regarding potential damage to the product from chloramines or chlorine-based bowl cleaners.

Overview

1. Function Description
2. Usage Features
3. Remote Control
4. Remote Control Pairing
5. Side Buttons
6. General Cautions for Use
7. Maintenance Features
8. Cleaning the Discovery DLS
9. Cleaning the Nozzle
10. Cleaning the Strainer
11. Water Draining
12. Extended Travel
13. Unit Separation (Removing the Discovery DLS)

The Bio Bidet Discovery DLS is an advanced smart toilet seat designed to enhance personal hygiene and comfort. It offers a range of features for washing, drying, and general convenience, all controllable via a remote or side buttons.

Function Description:

The primary function of the Discovery DLS is to provide a comprehensive bidet experience. It includes both rear and front wash functions, with an oscillating spray for thorough cleaning. The "Dynamic Stream" feature offers an alternating hot and cold water wash to stimulate bowel movements. After washing, a warm air dryer reduces the need for toilet paper, with adjustable fan speeds (Low, Medium, High) and an automatic shut-off after 4 minutes.

For user comfort, the seat features a heated seat with adjustable temperature settings. The water temperature for washing is also adjustable, as is the water pressure and nozzle position (forward/backward) to achieve optimal cleanliness.

The Discovery DLS incorporates a "Pre-Nozzle Rinse" cycle that activates when the seat sensor detects a user, rinsing the nozzle before each wash function. This ensures hygiene and prepares the nozzle for use. A built-in UV sterilizer automatically cleanses the nozzle after each use, providing an additional layer of sanitation.

Convenience features include an automatic open/close lid and seat, which can be toggled on/off by holding the "Nozzle Clean" and "Dynamic Stream" buttons for 3 seconds. A "Night Light" function provides a soothing glow for easy navigation in the dark, and its on/off state can be controlled by pressing the night light button. The device also has an "Auto Clean" function, which initiates a pre-programmed wash and dry cycle (90 seconds rear wash followed by 4 minutes warm air dry).

Usage Features:

The Discovery DLS can be operated using either a remote control or side buttons located on the unit.

Remote Control:

The remote control provides comprehensive command over all functions. It features dedicated buttons for:

• Stop: Halts all current operations.
• Front Wash: Activates an oscillating front wash. Pressing again disables oscillation.
• Rear Wash: Activates an oscillating rear wash. Pressing again disables oscillation.
• Warm Air Dryer: Turns on the warm air dryer. Adjustable fan speeds are available.
• Auto Clean: Initiates the pre-programmed wash and dry cycle.
• Open/Close Lid & Seat: Controls the automatic opening and closing of the lid and seat.
• Adjustable Nozzle Position: Moves the nozzle forward or backward.
• Adjustable Water Pressure: Increases or decreases water pressure.
• Adjustable Seat Temperature: Adjusts the heated seat temperature.
• Adjustable Air Temperature: Adjusts the warm air dryer temperature.
• Adjustable Water Temperature: Adjusts the wash water temperature.
• Nozzle Clean: Extends the nozzle for manual cleaning (only when the seat is unoccupied).
• Dynamic Stream: Activates the alternating hot/cold wash.
• Night Light: Toggles the LED night light on/off.

Remote Control Pairing:

If the remote is unresponsive, it can be re-paired by:

1. Unplugging the bidet seat.
2. Pressing and holding the "STOP" button on the remote until indicator lights flash.
3. Holding the remote close to the bidet seat and plugging the unit back in. The indicator lights will stop flashing upon successful pairing.

Side Buttons:

The side buttons offer essential controls:

• Power/Stop Button: Turns the bidet on/off. A short press powers on, a long press enters standby mode. A short press while powered on stops any operations. The power button's color indicates status: blue for UV sterilization mode or in use, red for ready to use.
• Auto Wash: Activates the pre-programmed wash and dry cycle.
• Rear Wash: Initiates a rear wash.

General Cautions for Use:

• Avoid using "high" or "medium" seat/warm air temperatures for extended periods to prevent burns.
• Ensure skin is close to the seat's sensing area during use for proper operation of cleaning and drying functions.
• Do not urinate on the nozzle to prevent dirt and clogging.
• Use the provided new hose assembly for installation; do not reuse old hoses or connect other appliances to the water source to prevent leaks.
• Unplug the power plug and close the angle valve during sudden power outages to prevent leaks.
• Avoid direct sunlight or heating equipment near the product to prevent discoloration.
• Do not supply power through external switching devices like timers to avoid incorrect thermal circuit breaker resetting.
• Ensure the water supply angle valve is turned off when removing the strainer, and tighten it firmly upon reinstallation to prevent leaks.
• For long periods of non-use (e.g., business trips), unplug the power plug, close the water source, and drain internal water to prevent freezing damage, fire, and leaks.
• During cold weather transport or storage, take anti-freezing measures to prevent damage from frozen internal water.
• Install a water stop valve in a convenient position to cut off inlet water in emergencies.
• Do not flush newsprint, paper pads, sanitary napkins, or other easily blocked items.
• Do not use in environments below 0°C.
• Avoid hitting the ceramic with heavy objects to prevent damage and leakage.
• Do not insert cementing materials into the toilet base to prevent cracking.
• Use batteries correctly: install with correct polarity, remove when not in use for a long time, replace depleted batteries promptly, insulate discarded batteries, keep out of reach of infants, and rinse immediately if electrolyte touches skin or eyes.
• Do not carry or store batteries with metal products, mix old and new batteries, decompose, or put batteries in water or fire.

Maintenance Features:

Cleaning the Discovery DLS:

• Disconnect the power cord before cleaning.
• Use a wet cloth to clean the product.
• Do not spray water directly onto the product.
• Avoid using thinners, benzene, or harsh toilet bowl cleaners (like sulfuric acid, nitric acid, glacial acetic acid, carbon tetrachloride, chloroform, acetone, butanone, benzene, toluene, phenol, cresol, dimethyl formamide, methyl ether, soybean oil, 95% acetate, 40% nitric acid, concentrated hydrochloric acid, alcohol, gasoline, kerosene, brake oil, etc.) on plastic parts, as this may cause discoloration, cracking, personal injury, electric shock, or fire.
• Do not force back, stand on the cover plate, or roughly open and close the cover plate or seat ring to avoid damage.
• Do not add water or detergent inside the smart toilet seat or wet the intelligent toilet lid and power plug with water or detergent.
• Regularly pull out the power plug and wipe dust with a dry cloth to prevent insulation issues and fire.

Cleaning the Nozzle:

• The "Nozzle Clean" feature extends the nozzle for manual cleaning when the seat is unoccupied.
• Gently clean the extended nozzle with a soft cloth or toothbrush.
• Press the "Stop" button to retract the nozzle.

Cleaning the Strainer:

• Turn off the water supply angle valve before removing the strainer.
• Ensure the strainer is firmly tightened when reinstalling it to prevent water leakage.

Water Draining:

• In case of damage to the seat and cover plate, or for extended travel, disconnect the power plug, turn off the water source, and drain the internal water.
• To drain water from the bidet, hold the release button (located on the side of the unit).

Extended Travel:

• If the seat will not be used for more than a few days, it is recommended to unplug the unit and turn off the water shutoff valve.

Unit Separation (Removing the Discovery DLS):

1. Disconnect the power plug.
2. Close the water supply shut-off valve.
3. Drain the water from the bidet by holding the release button.
4. Remove the bidet seat from the toilet by sliding it off the catch plate.

BEMIS bioBidet DISCVOERY DLS Specifications

General

Water Temperature Control	Yes
Heated Seat	Yes
Dryer	Yes
Remote Control	Yes
Bowl Shape	Elongated
Water Heating	Tankless
Nozzle Material	Stainless Steel
Nozzle Oscillation	Yes
Nozzle Position Adjustment	Yes
Water Pressure Adjustment	Yes
Seat Heating	Yes
Seat Temperature Adjustment	Yes
Deodorizer	Yes
Night Light	Yes
Auto Wash	Yes
Child Wash	Yes
Color	White
Nozzle Self-Cleaning	Yes
Wash Functions	Rear wash, front wash
Warranty	3 years
Voltage	120V