Benassi BT 2001 R - Use of Ballast; Track Adjustment

S.p.A. BT 2001 R
17
Fig.12 Fig.13
23) USE OF BALLASTS
The use of ballast is necessary when the wheels slip due to insufficient adhesion to the ground.
In this case, it is necessary to apply the metal modular weights Fig.13 Ref.1, which can be attached to the front bumper.
Use the appropriate threaded rods and nuts to fix the ballast. The rod Ref.2 Fig.13 is used to fix the ballast to the
bumper while the rod Ref.3 Fig.13 is used to hold the ballast together.
Total Weight of Front Ballast: 60 kg.
When towing, front ballast of 60 kg max. is permitted.
24) TRACK ADJUSTMENT
The rear tyre rims fitted to the tractor can be adjusted in order to adjust the track of the tractor to di fferent work
conditions.
Track adjustment is by re-positioning the rims to the relative plates on the hubs.
FRONT. Measurement in mm.
L2 TYRES C2 M2 C2 M2 C2 M2 C2 M2
ON
ADJUSTABLE
AXLE
1
ST
POSITION
2
ND
POSITION
3
RD
POSITION
4
TH
POSITION
100 4.00.8 610 710 670 770 730 830 790 890
100 4.00.10 610 710 670 770 730 830 790 990
REAR. Measures in mm.
L1 TYRES C1 M1 C1 M
1
C1 M1
WITH
ADJUSTABLE
PLATE
1
ST
POSITION 2
ND
POSITION 3
RD
POSITION
165 6.5/80.15 585 750 645 810 775 940
170 6.00.16 590 760 650 820 780 950