OPERATING INSTRUCTIONS
Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates
freely. If the valve is stuck or does not operate smoothly, contact a trained service technician(Fig. C).
NOTICE
Risk of property damage. Do not operate in vertical position! Vertical position
is for storage only!
1. Set the power switch to the OFF position (Fig. D).
2. Turn the air pressure regulator knob counter-clockwise until it stops(Fig. E).
3. Attach hose and accessories (FIG. F).
Check Safety Valve
FIG. C FIG. D
FIG. E FIG. F
To Next Page
Loading...