7
BM SERIES
2.2 CONTROL FUNCTIONS
Cutting Height Adjusting Handle
Adjust from position 1 to position 7 to set the cutting height.
The cutting height range from 25mm to 75mm.
Electric Start Button (BM2050E Only)
Start the lawn mower by pressing the electric start button while holding
the power lever to the handle grip.
Grass Box
When installed, the grass bag collects the grass released by the rear
discharge chute.
Power Lever
Press and hold the power lever, the engine will switch ON.
Release the power lever and the engine will switch OFF.
Self Propelled Drive Lever
Press the self propelled drive lever, and the lawnmower will start to
move with the engine running.
Release the drive lever to stop.
Speed Selection Lever
Once engine is running, select drive speed 1, 2 or 3, to adjust the
different propelled speed.
Starter Handle
For manual start, pull the starter handle while holding the power lever to
the handle grip.
To Next Page
Loading...
