Benchmark BM Series - Using Your Lawn Mower; Clean Flooded Engine

27
BM SERIES
7. USING YOUR LAWN MOWER
7.1. CLEAN FLOODED ENGINE
If the engine won't start after you have operated the start procedure several times,
the engine may be ooded with excess fuel. Use following steps to clear and start a
ooded engine.
1. Release the power lever.
2. Remove the spark plug cap.
3. Remove the spark plug, dry it, and then reinstall it.
4. Operate the start procedure described on Section 5.
NOTE
 Install the spark plug carefully by hand, to avoid cross-threading.After
the plug is seated tighten 1/8 to 1/4 turn with socket spanner of spark
plug to compress the washer. Release the power lever.
Grass Bag
Grass Bag Handle
Spark Plug Cap
Rear Discharge
Cover